CoolRunner Updated XSVF files for Demon *UPDATED FEB 13TH 2013*

Xecuter

Staff member
Top TX Brass
Dec 6, 2002
11,459
128
Asia
team-xecuter.com
UPDATED FEB 13TH 2013 - THIS APPLIES TO ALL CR VERSIONS REV A, B & C

NOTE: THE LATEST FILES ARE NOW INCLUDED WITH J-RUNNER. THESE INCLUDE THE NEW CORONA FILES.

These are the updated XSVF RGH files for Zephyr, Falcon, Jasper & Trinity to include support for the Demon CR_EN feature (CoolRunner Enable/Disable).

This is needed if you wish to boot a stock (untouched) onboard nand for xbl.

Attached are both sets of RGH1 and RGH2.

This updates all RGH1/RGH2 Phat and Trinity RGH Slim (which is based on RGH2 code). There is no Xenon support for obvious reasons.

DEMON PHAT RGH2 CoolRunner CR_EN File Info:

Zephyr: Program either RGH2_DEMON_CR_EN_D.xsvf, or RGH2_DEMON_CR_EN_C.xsvf

Falcon/Opus: Program either RGH2_DEMON_CR_EN_B.xsvf, or RGH2_DEMON_CR_EN_C.xsvf

Jasper: Program either RGH2_DEMON_CR_EN_A.xsvf, or RGH2_DEMON_CR_EN_D.xsvf

The CoolRunner Rev C already has the CR_EN pad to solder to, however the Rev A and B do not as they are older models, however we have designed the new code to use one of the corner pins of the Rev A and Rev B.




NOTE: THE LATEST FILES ARE NOW INCLUDED WITH J-RUNNER. THESE INCLUDE THE NEW CORONA FILES.
 

NeoGodSpeed

VIP Member
Mar 14, 2007
150
0
Arizona
Re: CR_EN to CoolRunner Rev A / Rev B

Thanks Uber:

performance is same on All current versions of TX Coolrunners correct?

only difference would be EN solder point when connecting this & the Demon together.
 

KhaineGB

VIP Member
Jun 19, 2011
731
0
Liverpool, UK
Re: CR_EN to CoolRunner Rev A / Rev B

Totally expecting soldering n00bs to f**k up their CR's with this...

If trying to install a DemoN doesn't kill their console first! Thanks for releasing a pic with where to solder to though Uber. Nice to see the slightly older hardware is compatible. :)
 

Xecuter

Staff member
Top TX Brass
Dec 6, 2002
11,459
128
Asia
team-xecuter.com
CoolRunner Updated XSVF files for Demon & CR_EN

These are the updated XSVF RGH files for Zephyr, Falcon, Jasper & Trinity to include support for the Demon CR_EN feature (CoolRunner Enable/Disable).

Attached are both sets of RGH1 and RGH2.

This updates all RGH1/RGH2 Phat and Trinity RGH Slim (which is based on RGH2 code). There is no Xenon support for obvious reasons.
The CoolRunner Rev C already has the CR_EN pad to solder to, however the Rev A and B do not as they are older models, however we have designed the new code to use one of the corner pins of the Rev A and Rev B.

 

Xecuter

Staff member
Top TX Brass
Dec 6, 2002
11,459
128
Asia
team-xecuter.com
CoolRunner Updated XSVF files for Demon

These are the updated XSVF RGH files for Zephyr, Falcon, Jasper & Trinity to include support for the Demon CR_EN feature (CoolRunner Enable/Disable).

Attached are both sets of RGH1 and RGH2.

This updates all RGH1/RGH2 Phat and Trinity RGH Slim (which is based on RGH2 code). There is no Xenon support for obvious reasons.
The CoolRunner Rev C already has the CR_EN pad to solder to, however the Rev A and B do not as they are older models, however we have designed the new code to use one of the corner pins of the Rev A and Rev B.