Coolrunner wire problem..

[cosmy032]

Good morning,

Yesterday when I opened xbox to mount an extra cooler,I think I accidentally pulled a wire from the chip "CoolRunner" ,Now xbox does not start, the lights are green lights, but I get the video signal,where to solder the wire? is the blue and I think it was stuck on the "pin", "D" or you can put the dvd drive inverter cable? sata not the other which has 2 extra pins

Sorry for my English

Thanks in Advance

 

[Utmad]

Pictures of the damage would help

 

[Martin C]

The template is there for your benefit:

[h=3]TEMPLATE: RGH/JTAG help[/h]

 

[cosmy032]

this is the problem..



TX Product(s) used: e.g J-R Programmer, CR3 Lite
Console Type: Jasper
NAND size: 256
Dashboard version: 2.0.16547 (I think)
CB version: e.g 5771
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
updflash.bin log (if applicable):
Image of Coolrunner:
Images of close-up soldering to motherboard:

Description of problem: I accidentally pulled a wire from the chip "CoolRunner" ,Now xbox does not start

Was the console working before you started: Yes

Do you get a green debug light appear on the RGH chip every 4-5 seconds: no, it's red always ,it was before
How long is the light on for each time:

 

[jery911]

just solder that blue cable back on pad D

 

[cosmy032]

sure on D? do not short circuit or something ..

 

[alexander_1333]

First of all take the TX logo sticker down from the IC chip and take a photo of it.

 

[cosmy032]

 

[Martin C]

Yes, that wire wasn't soldered to D properly. Just resolder it.

 

[cosmy032]

Ok,try tonight when I get home from work,this to be the problem? that the xbox does not start?

 

[Martin C]

Yes - without CPU_RST it won't boot.

 

[cosmy032]

Ok I tried, I did and now is xbox live,Now I have two questions...

I could make it to boot without dvd drive?
It had something if I cut the metal CPU cooler? ( I want to add a cooler to blow directly on the processor and is quite broad, because I want to cut your 4 inches of metal radiator 4-5 cm )

 

[unkn0wn.92]

First of all take the TX logo sticker down from the IC chip and take a photo of it.

BTW this is the first Revision of Coolrunner, earlier chips comes with white switch