- Dec 3, 2013
- 68
- 0
TX Product(s) used: J-R Programmer, CR rev c and upgrade qsb
Console Type: Corona v2
NAND size: 4GB
Dashboard version: e.g 2.0.14699
CB version: e.g 5771
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
updflash.bin log (if applicable):
Image of Coolrunner:
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem: installed 4gb r/w and read nand no issue program cr with timing file 0-2 to start( i know there a bunch started at the bottom and worked my way up) installed cr and the corona qsb upgrade. Created ecc then wrote ecc tried all timing files. then i cut blue and yellow wire like i have read online still nothing there it isnt trying to glitch still after again going through all timing files so i desoldered and soldered everything again and still same issue. i just want the dvd key so should i invest in a dgx ( which i knew has been discontinued but i know where to get one but its pricey have four more corona v2)or can some one guide me in the right direction please and thank you
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: N
How long is the light on for each time: doesnt
(be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).
Console Type: Corona v2
NAND size: 4GB
Dashboard version: e.g 2.0.14699
CB version: e.g 5771
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
updflash.bin log (if applicable):
Image of Coolrunner:
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem: installed 4gb r/w and read nand no issue program cr with timing file 0-2 to start( i know there a bunch started at the bottom and worked my way up) installed cr and the corona qsb upgrade. Created ecc then wrote ecc tried all timing files. then i cut blue and yellow wire like i have read online still nothing there it isnt trying to glitch still after again going through all timing files so i desoldered and soldered everything again and still same issue. i just want the dvd key so should i invest in a dgx ( which i knew has been discontinued but i know where to get one but its pricey have four more corona v2)or can some one guide me in the right direction please and thank you
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: N
How long is the light on for each time: doesnt
(be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).
