RGH Corona 4GB V2 xbox slim lost nand and key

[gamesbox]

i got corona 4 GB xbox slim V2 from my friend. when it power on green light shows then after some seconds it turn to red. he tried to rgh it. but now nand and key he lost. now i try to make it rebuild . As martin's notes,
i got other corona 4GB nand and i extracted the files.
Renamed the files as KV.bin, SMC.bin, fcrt.bin and smc_config.bin and put these files to xebuild- data folder.
copied the cpukey to the place in j runner.
selected the update 15574 and retail .
create nand without nanddump, typed 2 as LDV and created nand .
wrote the nand in xbox slim using 4gd kit
created ecc
wrote Ecc
Connected DGX . but xell not loading. the green light is showing on the xbox power also the red light in DGX is glowing. the green light is glitching on DGX. but no xell

can you help?

 

[jsinger47]

We might be able to help if you posted some information that was relevent.

Please fill out the RGH template.

 

[Steel-Cleiton]

pass me the cpu key and the region of the console
I will create a nand RGH for you

 

[gamesbox]

Thanks for your reply, i have attached some pics

tx product used- corona $GB Kit and DGX and CR3Lite
console type - corona 4GB slim V2
Nand size - 4gb nand read using Corona 4gb kit
dash board - no idea about the MB. trying to write 15574

pls note : there is no any details of this mother board. i am trying with other corona 4 gb nand to make this mother board work

 

[gamesbox]

Dear Steel- Cleiton, thanks for your support. see the log file i have posted. also i send a message to you

 

[jsinger47]

Well, you're building retail NANDs from the look of it.

Without the original KV, fcrt.bin, you won't ever be able to make a retail NAND.

 

[Steel-Cleiton]

Well, you're building retail NANDs from the look of it.

Without the original KV, fcrt.bin, you won't ever be able to make a retail NAND.

was what I said, I will create a rgh nand
he does not possess backup

 

[gamesbox]

ok. so any chance to load xell in this board? meanwhile i have did a trinity xbox in the same way before . it was the same problem. no nand and no cpukey.just a good motherboard. So i got other trinity nand and cpukey and xell reloded and now that rgh trinity is working well . but i have no idea about this corona

 

[jsinger47]

was what I said, I will create a rgh nand
he does not possess backup

I wasn't talking to you.

 

[Steel-Cleiton]

I wasn't talking to you.

ok sorry

 

[Steel-Cleiton]

Dear Steel- Cleiton, thanks for your support. see the log file i have posted. also i send a message to you

I answered your message

 

[Steel-Cleiton]

See if this works for you
added the dvd key that the log J-Runner
Now you can use a common chip tx, need not be the DGX
If the cpu key you passed is accurate for this console, it will work perfectly

http://wikisend.com/download/186794/updflash.zip

 

[gamesbox]

anyone can help?

 

[Steel-Cleiton]

anyone can help?

is impossible to help
need the cpu key at least
so I could create a functional nand rgh

 

[Steel-Cleiton]

put some pictures of your installation with CR3 lite
mainly cpu_reset and post_out points

 

[gamesbox]

 

[Steel-Cleiton]

View attachment 26258View attachment 26259View attachment 26260

select only the dips 1 and 5
leaving the default
test the timings 4-3 and 3-2
LK2 leave open to enable the 10 ohm
try to use the cpu reset point I marked on your photo

 

[jsinger47]

We do not offer support for clone coolrunners here. Thread closed.