Corona no orig nand

[xximod4uxx]

So i have had this console sitting in the back for a while from an install ages ago that went wrong and today i thought id try and give it a fix, when i read the nand it said that it was a trinity although it was a corona board and gave the error header is wrong after reading 2 nands.

I then flashed a corona consoles nand to it (a different motherboards nand) hoping that this would work but it doesnt.

Is there anyway i can get this console to work

p.s i dont have the cpu key

:facepalm:

 

[Antalpromille]

So i have had this console sitting in the back for a while from an install ages ago that went wrong and today i thought id try and give it a fix, when i read the nand it said that it was a trinity although it was a corona board and gave the error header is wrong after reading 2 nands.

I then flashed a corona consoles nand to it (a different motherboards nand) hoping that this would work but it doesnt.

Is there anyway i can get this console to work

p.s i dont have the cpu key

:facepalm:

You probably have ECC written to the original nand, and if you're lucky that ECC is created from the original nand and contains the KV. If not you need a donor KV and the console will need to stay RGH for it to work.

 

[xximod4uxx]

You probably have ECC written to the original nand, and if you're lucky that ECC is created from the original nand and contains the KV. If not you need a donor KV and the console will need to stay RGH for it to work.

When i tried to power up the console with the nand on there this is what happened:

With CR4 disabled: he ROL board piowered up but the console did not boot,

With CR4 enabled: the console made the beep sound but did not boot, is this because i have to enable the cr4 option for it to work?

Also how would the donor kv work my plan is to make this console rgh for life anyway

 

[Antalpromille]

save the dumps from your nand and write the pre-made CR4 ECC for your console. One is boots and you get the CPU Key you can try and see if it decrypts the nand you have dumped.

 

[xximod4uxx]

save the dumps from your nand and write the pre-made CR4 ECC for your console. One is boots and you get the CPU Key you can try and see if it decrypts the nand you have dumped.

Hi i just tried that but sadly it didnt work the console wouldnt power up, what should i do now?

 

[krypt1c]

Use it for spares or practice soldering on it. Wasn`t a good idea to write another consoles nand to it.

 

[playingmax]

It didn't power up with the cr4 ecc?
Witch one did u use? N what corona v? Do u have

Sent from my HTCONE using Tapatalk