RGH Corona Unglitchable?

Alteration

Full Member
Oct 7, 2015
46
0
Raleigh, North Carolina
I just bought a good friend of mine a glitch chip for his console, the same one I used for my Trinity (CoolRunner Rev C) and offered to transform it into an RGH, sadly though, when I got to working on it, J-Runner kept spitting out:
Code:
Version: 10
Flash Config: 0xC0462002
C0462002
This flashconfig belongs to Corona 4GB.
 As of now you cant read it via SPI.
 Please use an SD card reader.
when reading the NAND.

So I did some looking around, and it looks like the PSU indicates this is an unglitchable Xbox, it says: "12V - 9.6A" which I found was asked about here: http://team-xecuter.com/forums/threads/76285-Slim-250-GB-12V-9-6A

The only problem, these posts are from 2011, and 5 years later I wouldn't be surprised if someone had found a work around for it, but I can't find much more info on it. Can anyone help make this RGH happen?

The Hynix chip is at the bottom, and pictures can be provided if needed.
 
Last edited:

Alteration

Full Member
Oct 7, 2015
46
0
Raleigh, North Carolina
You PMed me first trying to sell me your services, I kindly declined and updated you on my Xbox, I'm sorry if there's any bad blood, I just really like working with electronics. I understand you can't read the NAND with the J-R Programmer V2 / NandX, I'd just like some information about how I can go about this.
 

GeekHeat

VIP Member
Jun 28, 2013
1,805
88
lancashire
Also u can't use a rev c to glitch a corona. U need to get an oscillator to add to your rev c or getva different glitch chip with oscillator built-in.
 
  • Like
Reactions: Alteration

Alteration

Full Member
Oct 7, 2015
46
0
Raleigh, North Carolina
This is kind of odd guys...a lot of conflicting information is being tossed around. On http://team-xecuter.com/forums/thre...-Corona-4GB-NAND-Using-Regular-SD-Card-Reader it explicitly says:
All current CoolRunner Rev C's with the Corona QSB Upgrade and also the CR3 Lite are compatible with the 4GB.
I'm not trying to be difficult, I'm just trying to get correct information and a working Corona RGH for as cheap as possible. Also, the product page for the CoolRunner Rev C says:
Brand New Coolrunner Rev C for Jasper Support all Corona V1 to V6 - US Fast Ship
Source: http://www.ebay.com/itm/Brand-New-C...462810?hash=item33a8b05e1a:g:GjQAAOSwXshWrWNy

I don't know if this is a modified version of the original chip with Corona support (the oscillator built-in) or just false advertising, but it really does seem that there's a ton of conflicting information being passed around. I just need to know the facts.

Thanks for the help guys! You've all been awesome thus far!

After a ton of research (it's awesome how many resources are out there for this! I love this community) I've decided that this particular Xbox 360 is a Corona V2 4GB with POST_OUT support (according to
http://team-xecuter.com/forums/threads/96752-Xecuter-Official-Corona-Motherboard-Identification-Solutions)

Correct me if I'm wrong, but my next move is to get a Corona 4GB R/W QSB to read the NAND, and then I can use the CoolRunner Rev C that I already have (assuming it works, once again, the conflicting information is kind of hard to work with).
 
Last edited:

Alteration

Full Member
Oct 7, 2015
46
0
Raleigh, North Carolina
Okay, so it was implying you could use it, after the Corona upgrade QSB is put in place, that makes a lot more sense, thanks.
I think I'm just going to buy this one: http://www.ebay.com/itm/CORONA-QSB-...D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557 and then http://www.ebay.com/itm/X360-Corona...043718?hash=item4af9c56746:g:IQYAAOSwY45UN1fL to read the NAND from the SD card. Wow, this become much more expensive than intended.

EDIT: Uhhh I can't find any place that sells the Corona QSB CR upgrade that I trust buying from, what am I to do?
 
Last edited:

GeekHeat

VIP Member
Jun 28, 2013
1,805
88
lancashire
Its a rev D they are selling if u look on the other pic on ebay.
Rev D is basicly a rev c with a built-in oscillator.
However rev D is a clone, TX didn't make rev D chips.
99.9% TX chips on ebay are clone/fakes.
 
  • Like
Reactions: Alteration

Alteration

Full Member
Oct 7, 2015
46
0
Raleigh, North Carolina
Yeah, the one that was shipped to me was a Rev C, and based on the chip there is no oscillator, so I'm just going to buy a Corona upgrade QSB from ModChipCentral. I really hope this works, I'm about to drop more cash than I expected.
 

GeekHeat

VIP Member
Jun 28, 2013
1,805
88
lancashire
Yeah, the one that was shipped to me was a Rev C, and based on the chip there is no oscillator, so I'm just going to buy a Corona upgrade QSB from ModChipCentral. I really hope this works, I'm about to drop more cash than I expected.
it's false advertising on ebay if they say it works with a corona, cos clearly rev c don't on their own.