For the first time in install these chips on a SLIM Corona V1...i am not using the Corona QSB to read the NAND...i used the wires to read the NAND from the corona, and my question is...is it possible to write XELL RELOADED through that way?...because after i read my NAND, which is both reads are same and no bad blocks...i write the ECC to the motherboard, but nothing comes up...the CR$-XL does light up every 3-4 seconds...do i really need a Corona QSB??
CORONA Corona V1 - CR4-XL JPV2
- Thread starter butowood
- Start date
BL4K3Y
VIP Member
Thanks for the quick reply...yeah sorry about the remplate...i will fill it out and post it...thanks BL4K3Y
nightmare0
BANNED
- Jun 13, 2013
- 137
- 18
chase
VIP Member
all that info will be available as soon as he completes the template like he was asked to
Last edited:
Okay...I still can't get this one fixed...I thought it might have been the devices I am using...so I got myself another Corona V2 motherboard...I did it exactly the same way i did this first one i am having with...The second one was a success...playin with it now...but this one i posted with the problem still the same...i can not boot into Xell, to get my CPU...after writing the ECC and it does not work, i write back the original NAND and back to stock, (with no booting problems)...so here is my template...
Console Type: Corona v1
Programmer Used: JRP v2.0
NAND Size: 16
Dashboard version: 2.0.16747
CB Version: 13181
Screenshot of NAND details from J-Runner: Check
J-Runner log:
J-Runner v0.3 Beta (7) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Filechecks disabled - No Filechecks carried out
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Reading Nand to C:\Users\Virgil Wood\Downloads\J-Runner v02 Beta (288) Core Pack\J-Runner v02 Beta (288) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 3:24 min:sec
Reading Nand to C:\Users\Virgil Wood\Downloads\J-Runner v02 Beta (288) Core Pack\J-Runner v02 Beta (288) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Corona
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:26 min:sec
Comparing...
Nands are the same
CR4 Selected
ECC created
Version: 10
Flash Config: 0x00043000
Writing Nand
image_00000000.ecc
Done!
in 0:19 min:sec
updflash.bin log (if applicable): NOPE
Image of the CR4 XL: Check
Images of close-up soldering to motherboard (attach images to your post): Check
Detailed Description of the Problem: I can not boot up Xell
Was the console working before you started: Y
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y
How long is the light on for each time (be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!). It is not the product...it is they way i did it...
Console Type: Corona v1
Programmer Used: JRP v2.0
NAND Size: 16
Dashboard version: 2.0.16747
CB Version: 13181
Screenshot of NAND details from J-Runner: Check
J-Runner log:
J-Runner v0.3 Beta (7) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Filechecks disabled - No Filechecks carried out
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Reading Nand to C:\Users\Virgil Wood\Downloads\J-Runner v02 Beta (288) Core Pack\J-Runner v02 Beta (288) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 3:24 min:sec
Reading Nand to C:\Users\Virgil Wood\Downloads\J-Runner v02 Beta (288) Core Pack\J-Runner v02 Beta (288) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Corona
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:26 min:sec
Comparing...
Nands are the same
CR4 Selected
ECC created
Version: 10
Flash Config: 0x00043000
Writing Nand
image_00000000.ecc
Done!
in 0:19 min:sec
updflash.bin log (if applicable): NOPE
Image of the CR4 XL: Check
Images of close-up soldering to motherboard (attach images to your post): Check
Detailed Description of the Problem: I can not boot up Xell
Was the console working before you started: Y
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y
How long is the light on for each time (be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!). It is not the product...it is they way i did it...
GeekHeat
VIP Member