Corona v2 CR4 install without QSB kit

[Kexxen]

Hey guys,
I am trying to do my first glitch on a corona v2. I have the Corona 4 GB R/W kit, but I didn't order the CR4 slim QSB kit: http://www.modsupplier.com/catalog/xecuter-cr4-xl-slim-qsb-v3-kit-p-1104.html, because modsupplier.com's page said that it wasn't required for Corona v2. Unfortunately, the only install guide that I can find for the CR4 uses the QSB kit. Does anyone know where there is a guide for installation without the QSB kit?

Thank you!

 

[BL4K3Y]

The information you were given is wrong.

A Corona V2 (4GB NAND) requires the 4GB R/W kit.

You could make your own SD reader - there is a schematic posted on the forum somewhere.

 

[Kexxen]

The information you were given is wrong.

A Corona V2 (4GB NAND) requires the 4GB R/W kit.

You could make your own SD reader - there is a schematic posted on the forum somewhere.

I am sorry that I wasn't clear in my question. I fixed my post. I have the 4 GB NAND R/W kit, but I was talking about the CR4 Slim QSB kit in the link I just put in.

 

[BL4K3Y]

I am sorry that I wasn't clear in my question. I fixed my post. I have the 4 GB NAND R/W kit, but I was talking about the CR4 Slim QSB kit in the link I just put in.

I see.

The Corona QSB V3 is optional and to be fair, the only points you will use on a Corona V2 are 5V and KIOSK.

A wire install is fine - the CR4 Corona guide explains where each wire goes (5V is on J2C3.13 and KIOSK is right next to it).

 

[Kexxen]

I see.

The Corona QSB V3 is optional and to be fair, the only points you will use on a Corona V2 are 5V and KIOSK.

A wire install is fine - the CR4 Corona guide explains where each wire goes (5V is on J2C3.13 and KIOSK is right next to it).

Will I still be able to use the RATER function, or do I need the QSB kit for this?