RGH corona v2 rgh help.

C

chiefamallrod

Full Member
Jan 26, 2014
40
0
so im ready to order everything to rgh my system but i need some advice, so far im ordering the

Xecuter Slim Proto v2 TX

Xecuter Corona v2 4GB NAND RW Kit
Xecuter CoolRunner QSB Slim Post

and possibly the Xecuter Corona Postfix Adapter TX
im wondering if i need anything else, if what im ordering is right and will work with my console, if i need to connect the nand reader and the slim proto together, and or if there is a tutorial that will help me with how to install these correctly into my console so i dont mess anything up wire wise.
 
C

chiefamallrod

Full Member
Jan 26, 2014
40
0
Game_Over said:
You also need the 4GB Nand r/w kit.

You should get two good nand dumps, compare them in J-Runner to be sure they match. Then install the Proto v2, create/write the .ecc to your console, boot to Xell and get the CPU key, then use the cpu key to build a freeboot image in J-Runner.
Click to expand...
thank you, but do i need the coolrunner qsb slim post? because the slim proto v2 comes with a slim post qsb v3, are they bassically the same thing?
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
If you're looking to mod a console and worried about spending an extra few dollars, you're gonna have a bad time...
 
  • Like
Reactions: DELETED
C

chiefamallrod

Full Member
Jan 26, 2014
40
0
Martin C said:
If you're looking to mod a console and worried about spending an extra few dollars, you're gonna have a bad time...
Click to expand...
lol i just dont wanna spend money on things i dont need or arnt gonna use but ive read the v3 helps boot times and since it comes with the slim proto v2 why not use it ya know? but onto a new topic. im getting the slim proto v2 the post fix adapter (just incase) and the r/w 4gb nand reader kit. from what ive read thats all i need to order, is the install guide on this website the same for all coronas? and the one thing i cant figure out is where to put the slim proto in the console. can some one show me a picture of it fully wired into a corona v2? or anything that could help a noob out.
 
C

chiefamallrod

Full Member
Jan 26, 2014
40
0
slim proto v2 question with pic

motherboard.jpghere is a picture of my mobo. can someone please tell me where to put my slim proto v2? i cant find a pic of one in a corona v2 and i looked at the install guide but it doesnt actualy show a picture of one in the console, i know where to wire everything too but not where i should stick the card to to not mess anything up. also can i leave the corona 4 gb nand reader in my console?
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Re: slim proto v2 question with pic

You were advised to read the guides and tutorials, which you clearly are not. I've seen at least 3 or 4 images showing everything installed.

The R/W kit is a QSB and designed to be left in place.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
chiefamallrod said:
close this thread please.
Click to expand...

Why? So you can just open another with the same basic questions?

threads merged. Do NOT start any other threads on this.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
C

chiefamallrod

Full Member
Jan 26, 2014
40
0
Martin C said:
Here's one example of an installation:

http://team-xecuter.com/forums/showthread.php?t=143085

It has a sticky pad on it. The placement is UP TO YOU.

It's amazing what you find by searching for 'proto v2 installation'.
Click to expand...
look im sorry, okay? i should have searched more thoroughly and im at fault here. i thank you for the information but i have a question. i notticed the nandx/cr-qsb v3 on his mobo. do i need one of those for my corona v2?
 
You must log in or register to reply here.