TX Product(s) used: J-R Programmer v2, CR3 PRO
Console Type: Corona V3
NAND size: 16MB
Dashboard version: 2.0.16202
CB version: 13182
Screenshot of NAND details from J-Runner:
Problem:
I have RGH'd a couple off Xboxes without any problem but this one has me beat.
I have tried everything and now need some help.
If i reflash stock nand the xbox boots fine. After loading ECC the CR3 Pro glitches and the xbox boots but there is no video output on both HDMI and Video out. I tried scan ip with no luck (no xbox found message).
On CR3 Pro Rater i get the following,
Pics of the install:(Sorry for the low light)
I tried CPU_RST on QSB_POST_SLIM_V2 and FT3T10 with the same result.(Sorry for the flux, it is the result of resoldering multiple times to make sure of a good connection.)
Any help will be appreciated.
Console Type: Corona V3
NAND size: 16MB
Dashboard version: 2.0.16202
CB version: 13182
Screenshot of NAND details from J-Runner:
Code:
===================================================
15 February 2014 12:40:36 PM
J-Runner v0.3 Beta (4) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Filechecks disabled - No Filechecks carried out
Checking Console..
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13182
Corona
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13182
Corona
Reading Nand to C:\Users\JacquesNB\Downloads\XBOX\Jrunner\J-Runner v02 Beta (288) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 3:25 min:sec
Reading Nand to C:\Users\JacquesNB\Downloads\XBOX\Jrunner\J-Runner v02 Beta (288) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Corona
RGH2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:25 min:sec
Comparing...
Nands are the same
ECC created
Version: 10
Flash Config: 0x00043000
Writing Nand
image_00000000.ecc
Done!
in 0:18 min:secI have RGH'd a couple off Xboxes without any problem but this one has me beat.
I have tried everything and now need some help.
If i reflash stock nand the xbox boots fine. After loading ECC the CR3 Pro glitches and the xbox boots but there is no video output on both HDMI and Video out. I tried scan ip with no luck (no xbox found message).
On CR3 Pro Rater i get the following,
Code:
Cor 3+ Selected
Version: 10
Power Up
Waiting for POST to change
Post 01 - .
Post 03 - ..
Post 04 - ...
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - GLITCH CHECK COMMENCE
Post 0C - CB_B ENTRY REACHED
Post 0D - GLITCH SUCCESSFUL
Post 0E - ....
Post 0F - .....
Post 10 - ......
Post 11 - .......
Post 12 - ........
Post 13 - .........
Post 14 - ..........
Post 15 - CONTINUING
TIMEOUT or SMC CORRUPTED - Shutting Down
ShutdownI tried CPU_RST on QSB_POST_SLIM_V2 and FT3T10 with the same result.(Sorry for the flux, it is the result of resoldering multiple times to make sure of a good connection.)
Any help will be appreciated.
