Corona V3 Bad Blocks

[Martin C]

If you need a tutorial on how to click on icons in J-Runner, you really shouldn't be messing with a DemoN in the first place. I've told you where you can find the options. For the erase you can go to Advanced/ Custom NAND/CR functions.

 

[marcelo sousa]

I'm friends with the same problem, did reading the corona v3, to compare the 2 bad block error would like to know if I can proceseguir with glicth
orona
RGH2 Selected
Nand Initialization Finished
Reading Nand
Error: 250 reading block 88
Done!
in 5:03 min:sec


Comparing...
Bad Block ID 0088 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0088 [Offset: 0x231000]
Bad Blocks Remapped
Bad Block ID 0088 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0088 [Offset: 0x231000]
Bad Blocks Remapped
Nands are the same
Comparing...
Bad Block ID 0088 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0088 [Offset: 0x231000]
Bad Blocks Remappe

 

[Taijigamer2]

One bad block should be fine. Jrunner has remapped it for u. Keep u'r original nand dump safe and proceed with RGH2. U can always flash back to stock if it doesn't work. If you get any more problems, start a new thread and fill in this template so people can help you. Good luck.

 

[marcelo sousa]

friend, my doubts should I follow to generate the ecc with cpukey or have to do something to fix the bad block before flash with ECC

 

[Taijigamer2]

Jrunner has already dealt with the bad block for u. And u have a retail NAND dump incase u want to restore retail. U are safe to proceed with ecc creation. Good luck.