FIXED corona v3 cr4 + demon : RGH stuck on xbox 360 logo

2130TOMER

Full Member
May 15, 2012
39
8
Hello everyone,
After installation of the DEMON and CR4 console fails to BOOT
RGH stuck on xbox 360 logo





  • Console Type:Corona v3
  • Programmer Used:demon
  • Dual Nand: demon phat + phat to slim Conversion qsb
  • NAND Size: 16
  • Dashboard version: 17150
  • CB Version:13181
  • Screenshot of NAND details from J-Runner:
ללא שם.png


  • J-Runner log

Code:
J-Runner v0.3 Beta (7) Started



Checking Files
Finished Checking Files
Corona Manually Selected
Glitch2 Selected
CR4 Selected
Reading Nand to E:\xbox360 tools\J-Runner\output\nanddump1.bin
XBOX360
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x7320 ST Micro (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Reading Nand
Done!
in 0:27 min:sec

Reading Nand to E:\xbox360 tools\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Reading Nand
Corona
Nand Initialization Finished
Done!
in 0:27 min:sec

Reading Nand to E:\xbox360 tools\J-Runner\output\nanddump3.bin
Comparing...
Reading Nand
Nands are the same
Done!
in 0:27 min:sec

Reading Nand to E:\xbox360 tools\J-Runner\output\nanddump4.bin
Comparing...
Reading Nand
Nands are the same
Done!
in 0:27 min:sec

Comparing...
Nands are the same
Current: XBOX
Switching to DemoN
DEMON
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0x182 
Writing Nand
Done!
in 0:36 min:sec

ECC created
DEMON
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:05 min:sec


==================================================  =
יום חמישי 12 פברואר 2015 19:16:20

J-Runner v0.3 Beta (7) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Corona
Glitch2 Selected
Nand Initialization Finished
CR4 Selected
Power On
Power off
Bad CPU Key
Initializing nanddump1.bin..
CpuKey is Correct
Added Key to Database
Corona
Nand Initialization Finished
Moving All files from output folder to E:\xbox360 tools\J-Runner\238431723743
Load Files Initiliazation Finished
17150
Started Creation of the 17150 xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.14.693
---------------------------------------------------------------
base path changed to E:\xbox360 tools\J-Runner\xeBuild
---- { Image Build Mode } ----
building glitch2 image

---------------------------------------------------------------
E:\xbox360 tools\J-Runner\238431723743\updflash.bin image built, info:
---------------------------------------------------------------
Kernel    : 2.0.17150.0
Console   : Corona
NAND size : 16MiB
Build     : Glitch (v2)
Xell      : power on console with console eject button
Serial    : 238431723743
ConsoleId : 025358420201
MoboSerial: 7501245236302375
Mfg Date  : 09/14/2012
CPU Key   : CEF20000000000000000000000000000
1BL Key   : DD880000000000000000000000000000
DVD Key   : D6500000000000000000000000000000
CF LDV    : 7
KV type   : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to E:\xbox360 tools\J-Runner\238431723743
Image is Ready
Initializing updflash.bin..
Corona
Nand Initialization Finished
DEMON
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:33 min:sec
  • Image of the demon

IMG_20150212_174416_600x800.jpgIMG_20150212_185605_600x800.jpgIMG_20150212_185611_600x800.jpgIMG_20150212_200547_800x600.jpgIMG_20150212_200616_800x600.jpg




  • Image of the CR4 XL
IMG_20150212_200524_800x600.jpgIMG_20150212_195814_600x800.jpgIMG_20150212_195806_600x800.jpg


  • Images of close-up soldering to motherboard
IMG_20150212_185624_600x800.jpgIMG_20150212_200459_600x800.jpgIMG_20150212_200605_800x600.jpg



  • Detailed Description of the Problem
I installed the demon on the console,then read the NAND 4 times,then i write stock nand on demon , I create the ECC and write it into the demon ... I installed the cr4 xl then i boot to xell .
get the cpu key ,create xebuild image and write it into the demon .
Try to boot into the stock = Success
Try to boot into the demon nand = stuck on xbox 360 logo






  • Video of the Problem:
[video=youtube_share;XlztK1nZw4I]http://youtu.be/XlztK1nZw4I[/video]





  • Was the console working before you started: yes
  • Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: yes
  • How long is the light on for each time : 0.5sec
 

2130TOMER

Full Member
May 15, 2012
39
8
I tried Advanced Demon fusion write option = no change
i tried to boot retail from the Demon= e71 + red dot
 

stucknvegas

VIP Member
Oct 25, 2012
656
0
Cypress CA. USA
I am still a little green on demon support
I did have one corona with bad blocks that got E71 on rgh Image and fixed by fusion
Give it a little time and more experienced member will chime in
 
  • Like
Reactions: 2130TOMER

jsinger47

Troll Eating Dogs
Feb 6, 2011
8,133
128
Grand Rapids, MI
E71 is typically caused by bad block remapping issues.

Create your RGH image using the "noremap" option in Xebuild settings.

Then use the Demon/Fusion write option to remap any potential bad blocks on the Demon NAND.
 

2130TOMER

Full Member
May 15, 2012
39
8
Same problem:(
Stuck on xbox360 logo



Code:
J-Runner v0.3 Beta (7) Started



Checking Files
Finished Checking Files
Downloaded *xeBuild/17150/_glitch.ini
Downloaded *xeBuild/17150/_glitch2.ini
Downloaded *xeBuild/17150/_glitch2m.ini
Downloaded *xeBuild/17150/_jtag.ini
Finished Checking Files
Initializing nanddump1.bin..
Corona
Glitch2 Selected
Nand Initialization Finished
CR4 Selected
Options.ini file was altered successfully
Use Edited Options Selected
Using edited settings
Load Files Initiliazation Finished
17150
Started Creation of the 17150 xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.14.693
---------------------------------------------------------------
base path changed to E:\xbox360 tools\J-Runner\xeBuild
---- { Image Build Mode } ----
building glitch2 image

---------------------------------------------------------------
E:\xbox360 tools\J-Runner\238431723743\updflash.bin image built, info:
---------------------------------------------------------------
Kernel    : 2.0.17150.0
Console   : Corona
NAND size : 16MiB
Build     : Glitch (v2)
Xell      : power on console with console eject button
Serial    : 238431723743
ConsoleId : 025358420201
MoboSerial: 7501245236302375
Mfg Date  : 09/14/2012
CPU Key   : CEF2
1BL Key   : DD88
DVD Key   : D65
CF LDV    : 7
KV type   : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Use Edited Options de-Selected
Saved to E:\xbox360 tools\J-Runner\238431723743
Image is Ready
Initializing updflash.bin..
Corona
Nand Initialization Finished
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 
Writing Nand
Starting remapping process
Done!
in 0:32 min:sec

Power On
Power off
 

2130TOMER

Full Member
May 15, 2012
39
8
No change
Keeps getting stuck on boot


Also i moved on the soldering points and I improved them.
and it didn't help.
the problem could be caused due to a faulty solder?
because I haven't touched the QSB
requires to remove the DEMON :frown:

 
Last edited:

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
Post the updflash.bin log please (you will find it in the same place as updflash.bin).

Load your stock NAND image as the source in J-Runner - does the "Bad Blocks" tab show anything?

Try erasing the DemoN's NAND manually:

  • Select the DemoN NAND
  • Go to "Advanced > Custom Nand/CR Functions"
  • Select "Erase" and "16"
  • Click "Run"

Make sure the DemoN NAND is selected before sending the erase command or J-Runner will erase the XBOX 360 NAND which you don't want to do.

Once the DemoN's NAND has been erased, write the glitch image to it again and let us know what happens.
 

2130TOMER

Full Member
May 15, 2012
39
8
The Xbox has boot to glitch image !
but

stock NAND image has no Bad Blocks

i erasing the DemoN's NAND manually
and write the glitch image , I got bad blocks In the writing process (Invalid Blocks : 0x182 )
the xbox Stuck on xbox360 logo
then
i Create image using the "noremap" and write it by Demon/Fusion write option
The Xbox has boot to glitch image:D

What about the bad blocks I need to worry about?

jr log :

Code:
J-Runner v0.3 Beta (7) Started



Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Corona
Glitch2 Selected
Nand Initialization Finished
DEMON
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Erasing Whole Nand
Done!
in 0:00 min:sec

CR4 Selected
Load Files Initiliazation Finished
17150
Started Creation of the 17150 xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.14.693
---------------------------------------------------------------
base path changed to E:\xbox360 tools\J-Runner\xeBuild
---- { Image Build Mode } ----
building glitch2 image

---------------------------------------------------------------
E:\xbox360 tools\J-Runner\238431723743\updflash.bin image built, info:
---------------------------------------------------------------
Kernel    : 2.0.17150.0
Console   : Corona
NAND size : 16MiB
Build     : Glitch (v2)
Xell      : power on console with console eject button
Serial    : 238431723743
ConsoleId : 025358420201
MoboSerial: 7501245236302375
Mfg Date  : 09/14/2012
CPU Key   : CEF2
1BL Key   : DD88
DVD Key   : D6
CF LDV    : 7
KV type   : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to E:\xbox360 tools\J-Runner\238431723743
Image is Ready
Initializing updflash.bin..
Corona
Nand Initialization Finished
DEMON
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0x182 
Writing Nand
Done!
in 0:33 min:sec

Power On
Power off
Options.ini file was altered successfully
Use Edited Options Selected
DEMON
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Erasing Whole Nand
Done!
in 0:00 min:sec

Using edited settings
Load Files Initiliazation Finished
17150
Started Creation of the 17150 xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.14.693
---------------------------------------------------------------
base path changed to E:\xbox360 tools\J-Runner\xeBuild
---- { Image Build Mode } ----
building glitch2 image

---------------------------------------------------------------
E:\xbox360 tools\J-Runner\238431723743\updflash.bin image built, info:
---------------------------------------------------------------
Kernel    : 2.0.17150.0
Console   : Corona
NAND size : 16MiB
Build     : Glitch (v2)
Xell      : power on console with console eject button
Serial    : 238431723743
ConsoleId : 025358420201
MoboSerial: 7501245236302375
Mfg Date  : 09/14/2012
CPU Key   : CEF2
1BL Key   : DD88A
DVD Key   : D6
CF LDV    : 7
KV type   : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Use Edited Options de-Selected
Saved to E:\xbox360 tools\J-Runner\238431723743
Image is Ready
Initializing updflash.bin..
Corona
Nand Initialization Finished
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0x182 
Writing Nand
Starting remapping process
Remapping Block 0x182 @ 0x3FF
Done!
in 0:33 min:sec

Power On
updflash.bin log:
Code:
base path changed to E:\xbox360 tools\J-Runner\xeBuild
---- { Image Build Mode } ----
building glitch2 image
<enter> key on completion suppressed
data directory overridden from command line to '17150\'
per build directory overridden from command line to 'data\'
file name overridden from command line to 'E:\xbox360 tools\J-Runner\238431723743\updflash.bin'

------ parsing user ini at 'data\options.ini' ------
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x19f bytes in memory
loading cpukey.txt from data\cpukey.txt
CPU Key set to: 0xCEF2A0000000000000000000002AB (weight:0x35 valid; ecd: valid)
setting 1blkey from ini: 0xDD88AD0C9ED669E7B56794FB68563EFA
1BL Key set to  : 0xDD88AD0C9ED669E7B56794FB68563EFA sum: 0x983 (expects: 0x983)
xex Key set to  : 0x20B185A59D28FDC340583FBB0896BF91 sum: 0x800 (expects: 0x800)
Using noremap option (ini file)
Using patchsmc option (ini file)

------ parsing ini at '17150\_glitch2.ini' ------
ini version 17150

ini: label [coronabl] found
found (1) 'cba_13121.bin' crc: 0x9255dfb1
found (2) 'cbb_13121.bin' crc: 0x6f3f9c18
found (3) 'cd_12905.bin' crc: 0x58221592
found (4) 'ce_1888.bin' crc: 0xff9b60df
found (5) 'cf_17150.bin' crc: 0x0a774268
found (6) 'cg_17150.bin' crc: 0xbe8ac817
ini dictates dual CB for this model

ini: label [flashfs] found
found (1) 'aac.xexp' crc: 0x899d7c53
found (2) 'bootanim.xex' crc: 0xe76c8e84
found (3) 'createprofile.xex' crc: 0x76c0f2c7
found (4) 'dash.xex' crc: 0xe1f07b1b
found (5) 'deviceselector.xex' crc: 0x99aff203
found (6) 'gamerprofile.xex' crc: 0x06185dc9
found (7) 'hud.xex' crc: 0x9f8dade0
found (8) 'huduiskin.xex' crc: 0xb186c353
found (9) 'mfgbootlauncher.xex' crc: 0xcb0b86e3
found (10) 'minimediaplayer.xex' crc: 0x81bb6500
found (11) 'nomni.xexp' crc: 0x7adef6f6
found (12) 'nomnifwk.xexp' crc: 0x6d7543f5
found (13) 'nomnifwm.xexp' crc: 0xa8a27e56
found (14) 'SegoeXbox-Light.xtt' crc: 0xe0ee6049
found (15) 'signin.xex' crc: 0x6dd20623
found (16) 'updater.xex' crc: 0x018dad7d
found (17) 'vk.xex' crc: 0x3edc0dbb
found (18) 'xam.xex' crc: 0x68767303
found (19) 'xenonclatin.xtt' crc: 0xd5d17ff5
found (20) 'xenonclatin.xttp' crc: 0x7a507ad1
found (21) 'xenonjklatin.xtt' crc: 0xdde4a14c
found (22) 'xenonjklatin.xttp' crc: 0xe2adddfb
found (23) 'ximecore.xex' crc: 0x6f9e8b97
found (24) 'ximedic.xex' crc: 0x1d992bfb
found (25) 'ximedic.xexp' crc: 0x1a4863a4
found (26) '..\launch.xex' crc: 0x00000000
found (27) '..\lhelper.xex' crc: 0x00000000
found (28) '..\launch.ini' crc: 0x00000000

ini: label [security] found
found (1) 'crl.bin' crc: 0x00000000
found (2) 'dae.bin' crc: 0x00000000
found (3) 'extended.bin' crc: 0x00000000
found (4) 'fcrt.bin' crc: 0x00000000
found (5) 'secdata.bin' crc: 0x00000000
------ ini parsing completed ------

output name overridden to: E:\xbox360 tools\J-Runner\238431723743\updflash.bin

1BL RSA pub key file is not available, signature checks will not be performed
PIRS RSA pub key file is not available, signature checks will not be performed
MASTER RSA pub key file is not available, signature checks will not be performed

------ Checking data\nanddump.bin ------
data\nanddump.bin file size: 0x1080000
nanddump header checks passed OK!
Loading NAND dump (0x1080000 bytes)...done!
Detecting NAND controller type from dump data...
    NAND dump is from a small block machine
    NAND dump uses big block controller
parsing dump into user and spare...
done!
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x800 of size 0x3800
SMC decrypted OK, will use if no external smc.bin is provided
seeking smc config in dump...found at offset 0xf7c000! Using if no smc config is provided.
CF slot 0 decrypted ok LDV 0x07 Pairing: 0xc2751f
setting LDV from image to 7
setting pairing data from image to 0xc2751f
pairing set to: c2 75 1f
MobileB.dat found at block 0x38e, page 0x0 (page 0x71c0), size 2048 (0x800) bytes
MobileC.dat found at block 0x38f, page 0x0 (page 0x71e0), size 512 (0x200) bytes
MobileE.dat found at block 0x390, page 0x0 (page 0x7200), size 2048 (0x800) bytes
Statistics.settings found at page 0x7bc0, size 4096 (0x1000) bytes
Manufacturing.data found at page 0x7bc0, size 4096 (0x1000) bytes
seeking FSRoot...fsroot found at block 0x391, page 0x0 (page 0x7220) raw offset 0x7220
seeking security files...
crl.bin found in sector 0x387 size 0xa00...verified! Will use if external file not found.
dae.bin found in sector 0x388 size 0xad30...verified! Will use if external file not found.
extended.bin found in sector 0x38b size 0x4000...verified! Will use if external file not found.
fcrt.bin found in sector 0x38c size 0x4000...pub key to verify signature is not available, skipping!
verified! Will use if external file not found.
secdata.bin found in sector 0x38d size 0x400...verified! Will use if external file not found.
done!
Writing initial header to flash image

------ loading system update container ------
17150\su20076000_00000000 found, loading...done!
    Read 0xb37000 bytes to memory
checking integrity...
header seems valid, version 2.0.17150.0
header hash is OK, checking content hashes...
content hashes seem OK, everything looks good!
extracted SUPD\xboxupd.bin (0x79fe0 bytes)
decrypting SUPD\xboxupd.bin\CF_17150.bin (0x4560 bytes)...done!
decrypting SUPD\xboxupd.bin\CG_17150.bin (0x75a80 bytes)...done!

------ Loading bootloaders and required security files ------
reading data\SMC.bin (0x3800 bytes)
reset smc load address to 0x800 size 0x3800
reading data\kv.bin failed, using kv.bin from nand dump
reading .\common\cba_13121.bin (0x1af0 bytes)
loaded cba_13121.bin, could not check signature rsa key not present!
reading .\common\cbb_13121.bin (0x7b40 bytes)
reading .\common\cd_12905.bin (0x5090 bytes)
reading .\common\ce_1888.bin (0x5606a b pad 0x56070 b)
reading data\xell-gggggg.bin (0x40000 bytes)
extracted SUPD\xboxupd.bin\CF_17150.bin (0x4560 bytes)
extracted SUPD\xboxupd.bin\CG_17150.bin (0x75a80 bytes)
reading 17150\bin\patches_g2corona.bin (0x920 bytes)
reading data\smc_config.bin failed, using smc_config.bin from nand dump
-------------------
checking smc_config
-------------------
extracting config
------------------
SMC config info:
------------------
Target temps: Cpu:  82רC Gpu:  78רC Edram:  76רC
Max temps   : Cpu:  89רC Gpu:  82רC Edram:  82רC
Cpu Fan     : (auto)
Gpu Fan     : (auto)
MAC Address : 60:45:bd:25:e0:e4
AVRegion    : 0x00000300 (PAL50)
GameRegion  : 0x02fe (PAL/EU)
DVDRegion   : 2
resetKey    : DUUX
---------------------
Checking for smc config data patches
smc config was not patched
---------------------
could not check signature of cba_13121.bin, 1BL RSA key not present!
done!
patch slot offset reset to: 0xb0000

------ Patching BLs and modifying patches ------
Patching BLs...Done!

------ Patching boot reasons and options into flash header ------
    Patching header for xell power reason

------ Encrypting and finalizing bootloaders ------
encoding SMC.bin size 0x3800
SMC checksum: fd7c6b42
unknown SMC found, type: Corona v6.2(2.05)
glitch hack found in SMC binary!
encoding kv.bin size 0x4000
decrypted keyvault has been set for reference
Master RSA pub not available, not checking hash
encoding cba_13121.bin size 0x1af0
encoding cbb_13121.bin size 0x7b40
CB 13121 seq 0x03020002 type: 0x03 cseq: 0x02 allow: 0x0002
    expected fuses:
    fuseset 00: C0FFFFFFFFFFFFFF
    fuseset 01: 0F0F0F0F0F0FF0F0 (retail slim)
    fuseset 02: 0F00000000000000 (sequence)
    fuseset 02: 0F00000000000000 (allow cseq 2)
    **dual CB flag detected!**
encoding cd_12905.bin size 0x5400
encoding ce_1888.bin size 0x56070
encoding xell-gggggg.bin size 0x40000
encoding cf_17150.bin size 0x4560
encoding cg_17150.bin size 0x75a80
encoding patches_g2corona.bin size 0x544
done!

------ Adding bootloaders to flash image ------
adding SMC.bin at raw offset 0x00000800 len 0x3800 (end 0x4000)
adding kv.bin at raw offset 0x00004000 len 0x4000 (end 0x8000)
adding cba_13121.bin at raw offset 0x00008000 len 0x1af0 (end 0x9af0)
adding cbb_13121.bin at raw offset 0x00009af0 len 0x7b40 (end 0x11630)
adding cd_12905.bin at raw offset 0x00011630 len 0x5400 (end 0x16a30)
adding ce_1888.bin at raw offset 0x00016a30 len 0x56070 (end 0x6caa0)
adding xell-gggggg.bin at raw offset 0x00070000 len 0x40000 (end 0xb0000)
adding cf_17150.bin at raw offset 0x000b0000 len 0x4560 (end 0xb4560)
adding cg_17150.bin at raw offset 0x000b4560 len 0x75a80 (end 0xc0000, rest in fs)
adding patches_g2corona.bin at raw offset 0x000c0010 len 0x544 (end 0xc0554)
Fixing up FS table...done!
Writing zeropair CG patch slot overflow data to sysupdate.xexp1
    at raw offset 0xd0000 len 0x00069fe0 (end: 0x00139fe0)...done!

------ adding 28 firmware files ------
extracted SUPD\aac.xexp (0x14000 bytes) (crc32: 0x899d7c53 ini: 0x899d7c53)
    adding as aac.xexp1 at raw offset 0x139fe0 len 0x00014000 (end 0x0014dfe0)
extracted SUPD\bootanim.xex (0x61000 bytes) (crc32: 0xe76c8e84 ini: 0xe76c8e84)
    adding as bootanim.xex at raw offset 0x150000 len 0x00061000 (end 0x001b1000)
extracted SUPD\createprofile.xex (0xc000 bytes) (crc32: 0x76c0f2c7 ini: 0x76c0f2c7)
    adding as createprofile.xex at raw offset 0x1b1000 len 0x0000c000 (end 0x001bd000)
extracted SUPD\dash.xex (0x59b000 bytes) (crc32: 0xe1f07b1b ini: 0xe1f07b1b)
    adding as dash.xex at raw offset 0x1c0000 len 0x0059b000 (end 0x0075b000)
extracted SUPD\deviceselector.xex (0xa000 bytes) (crc32: 0x99aff203 ini: 0x99aff203)
    adding as deviceselector.xex at raw offset 0x75b000 len 0x0000a000 (end 0x00765000)
extracted SUPD\gamerprofile.xex (0x1b000 bytes) (crc32: 0x06185dc9 ini: 0x06185dc9)
    adding as gamerprofile.xex at raw offset 0x766000 len 0x0001b000 (end 0x00781000)
extracted SUPD\hud.xex (0x1d000 bytes) (crc32: 0x9f8dade0 ini: 0x9f8dade0)
    adding as hud.xex at raw offset 0x783000 len 0x0001d000 (end 0x007a0000)
extracted SUPD\huduiskin.xex (0x14000 bytes) (crc32: 0xb186c353 ini: 0xb186c353)
    adding as huduiskin.xex at raw offset 0x7a1000 len 0x00014000 (end 0x007b5000)
extracted SUPD\mfgbootlauncher.xex (0x8000 bytes) (crc32: 0xcb0b86e3 ini: 0xcb0b86e3)
    adding as mfgbootlauncher.xex at raw offset 0x7b8000 len 0x00008000 (end 0x007c0000)
extracted SUPD\minimediaplayer.xex (0xc000 bytes) (crc32: 0x81bb6500 ini: 0x81bb6500)
    adding as minimediaplayer.xex at raw offset 0x7c0000 len 0x0000c000 (end 0x007cc000)
extracted SUPD\nomni.xexp (0xc800 bytes) (crc32: 0x7adef6f6 ini: 0x7adef6f6)
    adding as nomni.xexp1 at raw offset 0x7cc000 len 0x0000c800 (end 0x007d8800)
extracted SUPD\nomnifwk.xexp (0x2000 bytes) (crc32: 0x6d7543f5 ini: 0x6d7543f5)
    adding as nomnifwk.xexp1 at raw offset 0x7d8800 len 0x00002000 (end 0x007da800)
extracted SUPD\nomnifwm.xexp (0x5000 bytes) (crc32: 0xa8a27e56 ini: 0xa8a27e56)
    adding as nomnifwm.xexp1 at raw offset 0x7de000 len 0x00005000 (end 0x007e3000)
extracted SUPD\SegoeXbox-Light.xtt (0x6000 bytes) (crc32: 0xe0ee6049 ini: 0xe0ee6049)
    adding as SegoeXbox-Light.xtt at raw offset 0x7e5000 len 0x00006000 (end 0x007eb000)
extracted SUPD\signin.xex (0x19000 bytes) (crc32: 0x6dd20623 ini: 0x6dd20623)
    adding as signin.xex at raw offset 0x7ee000 len 0x00019000 (end 0x00807000)
extracted SUPD\updater.xex (0x7000 bytes) (crc32: 0x018dad7d ini: 0x018dad7d)
    adding as updater.xex at raw offset 0x809000 len 0x00007000 (end 0x00810000)
extracted SUPD\vk.xex (0xb000 bytes) (crc32: 0x3edc0dbb ini: 0x3edc0dbb)
    adding as vk.xex at raw offset 0x813000 len 0x0000b000 (end 0x0081e000)
extracted SUPD\xam.xex (0x253000 bytes) (crc32: 0x68767303 ini: 0x68767303)
    adding as xam.xex at raw offset 0x81f000 len 0x00253000 (end 0x00a72000)
extracted nanddump\xenonclatin.xtt (0x11b000 bytes) (crc32: 0xd5d17ff5 ini: 0xd5d17ff5)
    adding as xenonclatin.xtt at raw offset 0xa73000 len 0x0011b000 (end 0x00b8e000)
extracted SUPD\xenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1 ini: 0x7a507ad1)
    adding as xenonclatin.xttp1 at raw offset 0xb8f000 len 0x00018000 (end 0x00ba7000)
extracted nanddump\xenonjklatin.xtt (0x1a8000 bytes) (crc32: 0xdde4a14c ini: 0xdde4a14c)
    adding as xenonjklatin.xtt at raw offset 0xba8000 len 0x001a8000 (end 0x00d50000)
extracted SUPD\xenonjklatin.xttp (0x7000 bytes) (crc32: 0xe2adddfb ini: 0xe2adddfb)
    adding as xenonjklatin.xttp1 at raw offset 0xd50000 len 0x00007000 (end 0x00d57000)
extracted SUPD\ximecore.xex (0x17000 bytes) (crc32: 0x6f9e8b97 ini: 0x6f9e8b97)
    adding as ximecore.xex at raw offset 0xd57000 len 0x00017000 (end 0x00d6e000)
extracted nanddump\ximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb ini: 0x1d992bfb)
    adding as ximedic.xex at raw offset 0xd6f000 len 0x00090000 (end 0x00dff000)
extracted SUPD\ximedic.xexp (0x2800 bytes) (crc32: 0x1a4863a4 ini: 0x1a4863a4)
    adding as ximedic.xexp1 at raw offset 0xe00000 len 0x00002800 (end 0x00e02800)
reading 17150\..\launch.xex (0xd000 bytes)
    adding as launch.xex at raw offset 0xe02800 len 0x0000d000 (end 0x00e0f800)
reading 17150\..\lhelper.xex (0x6000 bytes)
    adding as lhelper.xex at raw offset 0xe11000 len 0x00006000 (end 0x00e17000)
***** could not read file '..\launch.ini', skipping *****

------ adding 5 security files ------
<- Processing crl.bin ->
reading data\crl.bin (0xa00 bytes)
crl appears crypted, attempting to decrypt with CPU key...failed! Trying alternate key...success!
    adding as crl.bin at raw offset 0xe1c000 len 0x00000a00 (end 0x00e1ca00)

<- Processing dae.bin ->
reading data\dae.bin (0xad30 bytes)
dae appears encrypted, attempting to decrypt with CPU key...failed! Attempting to decrypt with alternate key...
success!
    adding as dae.bin at raw offset 0xe20000 len 0x0000ad30 (end 0x00e2ad30)

<- Processing extended.bin ->
reading data\extended.bin (0x4000 bytes)
    adding as extended.bin at raw offset 0xe2c000 len 0x00004000 (end 0x00e30000)

<- Processing fcrt.bin ->
    could not read fcrt.bin, using data from previous parse...
    adding as fcrt.bin at raw offset 0xe30000 len 0x00004000 (end 0x00e34000)

<- Processing secdata.bin ->
reading data\secdata.bin (0x400 bytes)
    adding as secdata.bin at raw offset 0xe34000 len 0x00000400 (end 0x00e34400)

------ checking for Mobile*.dat ------
MobileB.dat found, adding from previous parse
    adding MobileB.dat as type 0x31 at raw offset 0xe38000 len 0x800 (end 0xe38800)
MobileC.dat found, adding from previous parse
    adding MobileC.dat as type 0x32 at raw offset 0xe3c000 len 0x200 (end 0xe3c200)
MobileE.dat found, adding from previous parse
    adding MobileE.dat as type 0x34 at raw offset 0xe40000 len 0x800 (end 0xe40800)
Statistics.settings found, adding from previous parse
    adding Statistics.settings at raw offset 0xf78000 len 0x1000 (end 0xf79000)
Manufacturing.data found, adding from previous parse
    adding Manufacturing.data at raw offset 0xf74000 len 0x1000 (end 0xf75000)

------ adding smc_config.bin ------
adding smc config to offset 0x00f7c000, len 0x400

------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image offset 0xe44000 len 0x4000 (end 0xe48000)...done!
fixing up big block controller on small block NAND LBA numbers...done!
calculating ECD bytes and assembling raw image...done!
done remapping!

------ writing image to disk ------
writing file 'E:\xbox360 tools\J-Runner\238431723743\updflash.bin' to disk...done!
---------------------------------------------------------------
E:\xbox360 tools\J-Runner\238431723743\updflash.bin image built, info:
---------------------------------------------------------------
Kernel    : 2.0.17150.0
Console   : Corona
NAND size : 16MiB
Build     : Glitch (v2)
Xell      : power on console with console eject button
Serial    : 238431723743
ConsoleId : 025358420201
MoboSerial: 7501245236302375
Mfg Date  : 09/14/2012
CPU Key   : CEF2A
1BL Key   : D
DVD Key   : D6
CF LDV    : 7
KV type   : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------

Thank you so much!!

Tomer









 

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
If the console now boots without freezing at the logo, you don't need to worry about anything else.

It looks like the DemoN's NAND has one invalid block which was dealt with successfully by J-Runner.
 
Last edited: