Corona V3 CR4 XL Install

[GameSysRepair]

So im currently doing a Xbox 360E Corona V3 board. QSB, post_fix, CR4 XL. I have everything wired up for the most part in the middle of reading the NAND, when it starts i get this on block 0 Error: 210 reading block 0, reads the rest of the NAND. When it compares the files they dont match. Have read the system 4 times now and it always come back the same. Ive never had a bad block at 0 before.

After it reads and compares JR clears both files and when i select the files i get

Initializing nanddump1.bin..
Header is wrong..

 

[Krafter]

Nvm.

 

[GameSysRepair]

Better read that again.

Version: 10
Flash Config: 0x00043000
Error: 210 reading block 0
00043000
Corona
Reading Nand to C:\J-Runner1\output\nanddump1.bin
Reading Nand
Error: 210 reading block 0
Done!
in 3:20 min:sec


Reading Nand to C:\J-Runner1\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Reading Nand
Error: 210 reading block 0
Done!
in 3:20 min:sec


Comparing...
0x0000
Initializing nanddump1.bin..
Header is wrong..

 

[GeekHeat]

Need pics.

 

[Krafter]

Better read that again.

Version: 10
Flash Config: 0x00043000
Error: 210 reading block 0
00043000
Corona
Reading Nand to C:\J-Runner1\output\nanddump1.bin
Reading Nand
Error: 210 reading block 0
Done!
in 3:20 min:sec


Reading Nand to C:\J-Runner1\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Reading Nand
Error: 210 reading block 0
Done!
in 3:20 min:sec


Comparing...
0x0000
Initializing nanddump1.bin..
Header is wrong..

Oops. Wrong thread lol. Sorry for the confusion.

 

[GameSysRepair]

Oops. Wrong thread lol. Sorry for the confusion.

Its ok. It happens to the best of us.

And what do you need to see on the pics?

 

[john mathews]

Its ok. It happens to the best of us.

And what do you need to see on the pics?

soldering

 

[GameSysRepair]

Best i can do.

Fixed link: https://www.dropbox.com/sc/y8c89wgqb9hxidr/AADgYH9LqC0vj9Nf1OF8EC6Ja

 

[GeekHeat]

Your soldering isn't the best. Are u using flux?

 

[GameSysRepair]

Never had problems with my soldering before and ive done 100's of these.

And what does the soldering have to do with the issue?

 

[gavin_darkglide]

Bad soldering can equal bad read/write of the nand. As there is only 1 bad block, I would assume that the problem is not with the soldering, but a problem being the bad block was remapped, and j-runner isnt finding it where it wants it.

 

[GameSysRepair]

Played around with it after a bit and got it working now.