[FIXED] Corona V3 Demon + CR4XL
TX Product(s) used: JRP V2, DemoN, CR4XL
Console Type: Corona V3
NAND size: 16
Dashboard version: doesn't matter
CB version: 13181
Screenshot of NAND details from J-Runner:
https://drive.google.com/folderview?id=0B2h6i2ukTX75Sm0wdVE1RWFtNDg&usp=sharing
J-Runner log:
Images of close-up soldering to motherboard:
https://drive.google.com/folderview?id=0B2h6i2ukTX75Sm0wdVE1RWFtNDg&usp=sharing
Description of problem: I was trying to install a DemoN to a Corona V3, i checked the DemoN with J-Runner and everything was fine, then i installed it with the "Demon Corona QSB V2" and i read the nand a couple of times, then i was opening the ribbon cables when i saw that near the 5V pad, a capacitor and an inductor were blown, i disconnected it and actually i don't know which doesn't work (maybe both work, C12 and L1), but i can't read my demon/console nand anymore, even with the demon desoldered Jrunner crashes.
It's wierd because if I toggle the nand with J-Runner, the blue light on the DemoN turns on and off and J-runner detects it.
Then i tried to read the nand with JRP V2 and it just gave some errors, if i try to power on the console, it doesn't do anything, also i am not 100% sure the nand i read was fine, jrunner just displays the info but other programs detect checksum errors, i thought that maybe i could bridge the nand, but i am not 100% sure my backups are correct, i attached them to the Google Drive link up there, as well as some pics of the DemoN QSB, the only thing soldered to the board. I must add that i never wrote anything to the console's nand.
Have a nice day and a merry christmas!
Was the console working before you started: Yes.
EDIT: Now, i connected the demon to the computer to show J-Runner crashing and it just read it without a problem, should i reconnect the Demon to the Xbox and try to read Xbox nand through it?
EDIT2: I soldered the DemoN, J-Runner prays:" manufacturer for code FF not found"
FINAL EDIT: Okay, now the problem is completely different, nothing to do with DemoN or with CR4XL at all, you can close and i will open another one.
TX Product(s) used: JRP V2, DemoN, CR4XL
Console Type: Corona V3
NAND size: 16
Dashboard version: doesn't matter
CB version: 13181
Screenshot of NAND details from J-Runner:
https://drive.google.com/folderview?id=0B2h6i2ukTX75Sm0wdVE1RWFtNDg&usp=sharing
J-Runner log:
Code:
lunes, 22 de diciembre de 2014 22:40:39
J-Runner v0.3 Beta (7) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Happy Holidays Everyone!
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00043000
Error: 650 reading block 0
Error: 650 reading block 1
Error: 650 reading block 2
Error: 650 reading block 3
00043000
Corona
Reading Nand to C:\Users\Edu\Downloads\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Cancelled
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Initializing nanddump1-.bin..
Corona
Glitch2 Selected
Nand Initialization Finished
Comparing...
0x0148
0x01D7
0x01D8
0x01D9
0x01DA
0x01DB
0x01DC
0x01DD
0x01E0
0x01E1
0x01E2
0x01E3
0x01E4
0x039D
0x039E
0x039F
0x03BE
0x03BF
0x03C0
0x03C1
0x03C6
0x03C7
0x03C8
0x03C9
0x03CB
0x03CC
0x03CD
0x03D8
Initializing nanddump1-.bin..
Corona
Nand Initialization Finishedhttps://drive.google.com/folderview?id=0B2h6i2ukTX75Sm0wdVE1RWFtNDg&usp=sharing
Description of problem: I was trying to install a DemoN to a Corona V3, i checked the DemoN with J-Runner and everything was fine, then i installed it with the "Demon Corona QSB V2" and i read the nand a couple of times, then i was opening the ribbon cables when i saw that near the 5V pad, a capacitor and an inductor were blown, i disconnected it and actually i don't know which doesn't work (maybe both work, C12 and L1), but i can't read my demon/console nand anymore, even with the demon desoldered Jrunner crashes.
It's wierd because if I toggle the nand with J-Runner, the blue light on the DemoN turns on and off and J-runner detects it.
Then i tried to read the nand with JRP V2 and it just gave some errors, if i try to power on the console, it doesn't do anything, also i am not 100% sure the nand i read was fine, jrunner just displays the info but other programs detect checksum errors, i thought that maybe i could bridge the nand, but i am not 100% sure my backups are correct, i attached them to the Google Drive link up there, as well as some pics of the DemoN QSB, the only thing soldered to the board. I must add that i never wrote anything to the console's nand.
Have a nice day and a merry christmas!
Was the console working before you started: Yes.
EDIT: Now, i connected the demon to the computer to show J-Runner crashing and it just read it without a problem, should i reconnect the Demon to the Xbox and try to read Xbox nand through it?
EDIT2: I soldered the DemoN, J-Runner prays:" manufacturer for code FF not found"
FINAL EDIT: Okay, now the problem is completely different, nothing to do with DemoN or with CR4XL at all, you can close and i will open another one.
Last edited: