Corona v3 Install Help

[angelsaavedra81]

Console Type: Corona v3
Programmer Used: JRP v2.0
NAND Size: 16
Dashboard version: 17150
CB Version: 13181
Screenshot of NAND details from J-Runner:
http://gyazo.com/0c58ad7f976e78c3c08cfec990273282

J-Runner log

Monday, January 05, 2015 4:58:58 PM

J-Runner v0.3 Beta (7) Started
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 9188
Trinity
Version: 10
Flash Config: 0x00043000
Writing Nand
CORONA_16MB.ecc
Done!
in 0:18 min:sec
Initializing nanddump1.bin..
Corona
Glitch2 Selected
Nand Initialization Finished

updflash.bin log (NA)

Image of the CR4 XL

http://gyazo.com/146ea445f06bc8b9d5438ec0038aef4e

http://gyazo.com/e8aa325d4d9582e739013958daf3f526


Images of close-up soldering to motherboard
http://gyazo.com/b80fbf4dc6c99313a2364c6032e8f140

http://gyazo.com/7e373e867b0bf39fcb2b4be6ea820a02

http://gyazo.com/d1f21032dc30a48ccd70c88413df9070

I've installed the CR4XL It gets power(red light) attempts to glitch (green light)but it doesn't boot xell when I've put the Magic Smc For rgh2.0 for the Corona 16mb need a second view help me

Was the console working before you started: Yes
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Yes
How long is the light on for: each time about 3 seconds

 

[Krafter]

You need to tick the CR4 option in J-Runner.

 

[angelsaavedra81]

fixed i had the chip set to phat when it should be on slim

 

[briggs01]

You need to tick the CR4 option in J-Runner.

we would not need all these threads if people would read , learn and look before posting asking for help