Corona v3 Slim Post QSB V3

[igorbulatovic]

Hi there i have corona v3 and i have question about my successfully damage Slim Post QSB V3 during solidering .

It there any why that i can connect blue wire direct on a back of motherboard? in this case where?

Thanks for any replay

 

[Martin C]

you need the POST FIX QSB and the normal images for soldering CPU_RST on a Corona.

 

[igorbulatovic]

So if i have post fix adapter v2 around cpu and yellow wire is attach on post fix adapter then blue wire i can connect on back of mobo? do you have any suggestion that i made successfully RGH on my Corona v3. Please sorry for thread-jacking it was not a meaning but i am desperate to find any solution to my damage board!

 

[chase]

You need to install post fix qsb and then solder yellow wire to it

You can solder cpu_rst (blue wire) to D like the image below

 

[igorbulatovic]

If i get you right
the yellow wire will go on one of the points on the picture in my case it will be on number 5

the blue wire it will go here like this so that is all i need to do? And please thanks for all the help that i get from you!!!

 

[Martin C]

yes of course. I don't understand what the confusion is with CPU_RST. That's the exact same point you use when the QSB is fitted.

 

[igorbulatovic]

I am confused not a QSB now everything is crystal clear i will publish everything when i have successfully RGH installed on my Corona v3. Thank you Martin C for all the support that i get from you today