CORONA corona v4 trouble with glitching and booting

appokruznz1028 · Jan 30, 2015

so i have a conora v4 , i have the cr4 installed and the post out add on in place installed , it glitches but never boots xell to get image , looking for some help here to find out what i am doing wrong here , tries to glitch for about 2 minutes straight then the fan goes really fast and then for some reason the fan just shuts off , i have tried rater but not sure if i am doing it right cause this is my first conora v4 install and first time even trying rater so i think i need to install a wire on the k pad but not sure where to hook it up to if so , here is the J-Runner log:

Code:

===================================================
Friday, January 30, 2015 1:33:53 AM


J-Runner v0.3 Beta (7) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
Downloaded *xeBuild/7371/su20076000_00000000
The remote server returned an error: (404) Not Found.
Finished Checking Files
Corona 4GB Manually Selected
Cancelled
F:\
Reading from F:\ to C:\Users\Adam\Desktop\jrunner\output\output\nanddump1.bin
Done!
in 5:36 min:sec
F:\
Reading from F:\ to C:\Users\Adam\Desktop\jrunner\output\output\nanddump2.bin
Initializing nanddump1.bin..
Corona 4GB
Glitch2 Selected
Nand Initialization Finished
Done!
in 5:38 min:sec
Comparing...Takes a while on big nands
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same
ECC created
Writing to F:\ from C:\Users\Adam\Desktop\jrunner\output\output\image_00000000.ecc
Done!
in 0:03:46 min:sec:ms
Initializing nanddump1.bin..
System.NullReferenceException
CR4 Selected
ECC created
Writing to F:\ from C:\Users\Adam\Desktop\jrunner\output\output\image_00000000.ecc
Done!
in 0:00:643 min:sec:ms
Initializing nanddump1.bin..
Corona 4GB
Nand Initialization Finished

like i said i haven't even been able to boot xell yet so here is the rater info i have too 

CR4 Selected
Version: 10
Power Up
Waiting for POST to change
Post 40 
Post 41 
Post 40 
Post 10 - ...... 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Shutdown
CR4 Selected
Version: 10
Power Up
Waiting for POST to change
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 06 - .... 
Post 07 - ..... 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE

here are the picks of the board

http://gyazo.com/8ef04816996fb05b4c91cbc7b1e3b552
http://gyazo.com/7cbaa7e4473d9bf8878d758c8c109336
http://gyazo.com/1ea4934c2e2c3b1ec3875876ff0ea12f
http://gyazo.com/c1afc35598577317b08f67abd7dd24fe
http://gyazo.com/505afc7872bf119f267fb5c0b63e2e9e
http://gyazo.com/5a36d7a8f4789a540bcbad3a9ca5ee41
http://gyazo.com/d3df3970285d1241b7ca1aeeec4be35a
http://gyazo.com/10c1f3bdcc79898f7170778f16fb0b7d

here is a picture of jrunner for the cb versions and info

http://gyazo.com/88d3d9c1795ef08801e27c9597bb1850
http://gyazo.com/86ae4e3cf704b6381d08a85b79ddd3de

wondering what am i doing wrong here cause this is way harder then a phat or trinity console so im walking a little blind and i cant find anyone that is in the same boat on the forum to read up on what they did to fix this problem so some help would be awesome with this

thanks

briggs01 · Jan 30, 2015

have you still got the corona R/W on R/W or have you put in onto xbox , or even have you took it out , does it still boot stock

nofeloniesyet · Jan 30, 2015

is that samsung ram? if so you could try the winbond 4gb patches in dashlaunch patches in jrunner.

appokruznz1028 · Jan 30, 2015

i dont know if its a samsung ram on it but what are you talking about with the winbond 4gb patches ? how would i do that and what is it ? yes if i put the stock image back on it and remove the power 5v power cable from it , then it will boot stock dash , the only reason i am trying to glitch this is for some reason xbox locked it for a subscription thing so it wont let you even play a game so that is why i am trying to make it a rgh console or even make a new stock retail image to by pass the subscription lock error message

appokruznz1028 · Jan 30, 2015

i still have the r/w on and i have to remove the cable from the board for it to be able to power on at all if the cable it in place for some reason unknown to me it will not power on the console just dings , it does boot stock image

appokruznz1028 · Jan 30, 2015

am i even doing the rater thing right or am i missing things cause it seems way to empty like its missing info or something other then what it says in my rater section of my first post

BrockThunderjam · Jan 30, 2015

Measure between post out and ground and report back. Should be around 60k ohm. If it's not your post out may not be properly seated.

appokruznz1028 · Jan 30, 2015

i dont know how to measure the ohm on the post out and ground

BrockThunderjam · Jan 30, 2015

If you have a multimeter put one probe on the cr4 post out solder point and the other on the metal chassis somewhere. (Post out is pad c)

appokruznz1028 · Jan 30, 2015

ok so i did that and i am getting a reading of 50.4

BrockThunderjam · Jan 30, 2015

50.4 k or 50.4?

appokruznz1028 · Jan 30, 2015

i turned my multimeter to 200k and it then gave my 50.4 on the reader so i guess its 50.4k

appokruznz1028 · Jan 30, 2015

ok so now what do i do ? its 50.4k and im no closer then i was when i posted this thread

stucknvegas · Jan 30, 2015

Did you bridge R2C4 resistor for Rater use
Look in CR-pro section >sticky ((motherboard ID

briggs01 · Jan 30, 2015

http://www.google.co.uk/url?sa=t&rc...CNgsgK&usg=AFQjCNH2e24T4FTCxR1o9xCO6xOaePMBcw

stucknvegas · Jan 30, 2015

Subscrition no pay box Build image with No Mobile ticked does the trick
Never going online again RGH only
What happened to Mr post bit jumper it seems to be missing
Most of time no green debug light if post fix is the trouble

Antalpromille · Jan 30, 2015

Why did you add the cap if you haven't got it booting? If your testing dips, desoldering the cap first since it's most likely not needed (at least not yet).

appokruznz1028 · Jan 30, 2015

i have done everything , no caps no bridge nothing works

appokruznz1028 · Jan 30, 2015

so here is the rater again

CR4 Selected
Version: 10
Power Up
Waiting for POST to change
Post 04 - BOOT SEQUENCE STARTING
Post 06 - ....
Post 0E - CB_B ENTRY REACHED
Post 0F - GLITCH SUCCESSFUL
Post 4F
Post CF
Post EF
Post CF
Post 8F
Post 87
Post 07 - .....
Post 03 - ...
Post 01 - .
Post 80
Post C0
Post C8
Post C9
Post E9
Post E8
Post 68
Post 60
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE

so thing still doesn't seem right with rater or something cause as far as i remember from the forums instead of all of the dots isnt there suppose to be words there too and dont i have to hook the k pad to somewhere on the board here , i removed the cap and still nothing just glitch after glitch until the fans kick in and shut off the console after like about 5 mins

stucknvegas · Jan 30, 2015

What do you mean no bridge
does the debug green light work

Search

Search

CORONA corona v4 trouble with glitching and booting

appokruznz1028

briggs01

nofeloniesyet

appokruznz1028

appokruznz1028

appokruznz1028

BrockThunderjam

appokruznz1028

BrockThunderjam

appokruznz1028

BrockThunderjam

appokruznz1028

appokruznz1028

stucknvegas

briggs01

stucknvegas

Antalpromille

appokruznz1028

appokruznz1028

stucknvegas