FIXED Corona v6 nand issue.

[morinzo]

Trying to repair someones v6 corona, already repaired the cpu_rst point but after he removed everything he did a erase in jrunner on the 4gb v6. I have the orig partial dumps & orig full dumps. when I write the orig full dumps to console it just sits there with the center blue led on. Customer replaced rf green leds with blue & yellow orange for error led.

It previouslt had slim proto v2 and corona post fix adapter on it. the xecuter 4gb r/w is still attached to the console.

 

[Martin C]

If the console even powers on it means the write was ok and SMC is fine.

I'd try writing any valid Corona 48MB image to it and see what it does. Nothing stops you putting on a proper RoL board to see what error code you get (if at all).

 

[morinzo]

I got it after writing the full img several times..

Thx..

 

[Martin C]

Obviously since you neglected to post any pics, help was limited. My guess was you were using wires instead of a QSB, which are known to cause problems if left in place.