GENERAL corona v6 no power blown capacitor

[moody_007]

hi eveybody i have a corona v6 i was going to install LTU2 on it i installed the DGX and got keys restored it to stock wrote the keys and everything gone well i assembled the console and tried it first time it worked everything is good but next hour i was trying to start the console once i pressed the power button i heard a blowup sound and the smoke starts coming up from the HDD side so i removed the power quickly i tried to power it on after 2 mins but no power i opened the console and found that this capacitor in the attached pic is blown i have a RRoD Trinity board i took the same capacitor from it and installed in on this console but this doesn't work my question
is it because this is not the required capacitor or there is another thing could be damaged in the board ?
thanks for help guys.

 

[morinzo]

I'm guessing its the cap with the red ink on top that you replaced??

 

[AllyNerd]

Yea I was just wondering the same thing lol at least tell us which one you replaced to avoid any confusion op... And have you checked over your board for anything mistakenly bridged or solder splashes? Weird for a v6 capacitor to blow out the blue unless it's due to user error ��

 

[moody_007]

Yea I was just wondering the same thing lol at least tell us which one you replaced to avoid any confusion op... And have you checked over your board for anything mistakenly bridged or solder splashes? Weird for a v6 capacitor to blow out the blue unless it's due to user error ��

thank you guys , and yes the pink Cap is the replaced one i took it from Trinity board i noted that the newest boards comes with blue caps and this is V6 the newest board also i already checked the whole board nothing bridged if there was anything bridged the console will not turn on when i tried it first time