Corona V6 Wire Install

[kapios]

I am looking to install a cr4 on a similar xbox (4gb slim, corona v6). A lot of the tutorials that I have found show the wiring with the QSB which is not required on the corona v6.

Can you help with identifying which wires need to be connected where (cr4 and the motherboard).

Thank you

 

[gavin_darkglide]

the only qsb needed is the postfix board for a corona v6, other than that, follow the slim proto guide for 5v standby, and gnd. the cr4 guide for corona will tell you where to install the rest of the wires. it is a fairly simple install.

 

[kapios]

Thank you. I will use the wire locations as noted in the guide.

Does the CR4 require bridging R2C6 and R2C7? It appears that there is no need in this case - could someone confirm?

 

[ochbay]

No bridging those enable the sda and scl ports on the header but the cr4 doesn't use these. but u do need to bridge r2c4 for rater

 

[vinavinay]

I too have same console and I am gonna do my first install soon. I have been confused but with the help of elite members, I have a clear picture now. Below is the link which was given to me as reference, I hope it will help you as well.

http://team-xecuter.com/forums/showt...XBOX360E-CR4XL