Console Type: Corona v6 (X360 E) Samsung Chips
NAND size: 4GB
Dashboard version: 2.0.16537.0
CB version: 13182
Screenshot of NAND details from J-Runner:

J-Runner log:
Image of CR3 Pro board:

Images of close-up soldering to motherboard:


Description of problem:
Parts list:
CR3 Pro V1.0S Full Post
Corona postfix adapter V2
Corona 4GB-V4 QSB
JRP/NANDX/CR QSB V3 Corona
QSB_POST_SLIM_V2
The 360 does not boot after flashing the ECC.
Can i use the Full Post CR on this V6 that has no post out with the the postfix adapter?
Do i have to solder these 3 points on the postfix adapter or are they just to hold the adapter in place?

Was the console working before you started: Yes
NAND size: 4GB
Dashboard version: 2.0.16537.0
CB version: 13182
Screenshot of NAND details from J-Runner:

J-Runner log:
Code:
===================================================
Sunday, March 16, 2014 6:02:22 PM
J-Runner v0.3 Beta (4) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Corona 4GB
RGH2 Selected
Nand Initialization Finished
ECC created
Writing to G:\ from D:\Users\Relax\Desktop\JRunner\output\image_00000000.ecc
Done!
in 0:00:267 min:sec:ms
Initializing nanddump1.bin..
Corona 4GB
Nand Initialization Finished
===================================================

Images of close-up soldering to motherboard:


Description of problem:
Parts list:
CR3 Pro V1.0S Full Post
Corona postfix adapter V2
Corona 4GB-V4 QSB
JRP/NANDX/CR QSB V3 Corona
QSB_POST_SLIM_V2
The 360 does not boot after flashing the ECC.
Can i use the Full Post CR on this V6 that has no post out with the the postfix adapter?
Do i have to solder these 3 points on the postfix adapter or are they just to hold the adapter in place?

Was the console working before you started: Yes