I can't update, delete anything, and save anything to it. It it possible to solder a new chip? Thanks.
Corrupt 4gb Flash memory Corona v6.
- Thread starter 10114jose
- Start date
This xbox isn't rgh, but I did it anyway.
TX Product(s) used: none
Console Type: corona v6
NAND size: 4GB
Dashboard version:2.0.16203.0
CB version: idk what that it is
Screenshot of NAND details from J-Runner:
don't have
J-Runner log:
updflash.bin log (if applicable):don't have
Image of Coolrunner:don't have
Images of close-up soldering to motherboard:
don't have
Description of problem:
Was the console working before you started: Y/N y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: Y/N n
How long is the light on for each time
TX Product(s) used: none
Console Type: corona v6
NAND size: 4GB
Dashboard version:2.0.16203.0
CB version: idk what that it is
Screenshot of NAND details from J-Runner:
don't have
J-Runner log:
updflash.bin log (if applicable):don't have
Image of Coolrunner:don't have
Images of close-up soldering to motherboard:
don't have
Description of problem:
Was the console working before you started: Y/N y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: Y/N n
How long is the light on for each time
Your OP was very vague and I assumed that when you said you couldn't update or save you were talking about an RGH system. Even though you don't have any TX products you should give more detail on what you've tried and the problems you're having. Just keep in mind that this is a TX product support forum so your help might be limited.
john mathews
VIP Member
pm jsinger u have a curropted internal memory I had one like this and had someone remove nand and replace it with a 16mb nand and all is well
The 4gb internal memory is corrupt. I can't save anything to it and, delete anything off it. I've tried this http://support.xbox.com/en-US/xbox-360/xbox-live/error-code-3f4b .
How would I solder a new one to it?
I'll pm him.
How would I solder a new one to it?
I'll pm him.
You don't solder one. It's what they call a BGA chip and you need special equipment to replace that type. What Jsinger and others have done is to remove the 4G chip and replace it with a 16M chip which are easier to install and can be found really easy.
you can bypass the internal memory and tell console to save updates to external storage. look here and it will explain all.
Dale
Ok.
I tried that, but the 4gb nand won't format.
I'll probably just ask jsinger. Thanks for all of your help.
I tried that, but the 4gb nand won't format.
I'll probably just ask jsinger. Thanks for all of your help.