ANSWERED Corrupt stock jasper nand

F

Fanboy

Full Member
Sep 9, 2011
26
0
Ok to make long short i did the RGH and had 5 nands identical so created ECC and then ran into problems. Now without going into it all i removed Glitch chip to give up bu when i flashed nand back i get RROD (0022).

Now none of these nands open in 360Flashtool but tried NandHealer and found no bad blocks and CB6750. Im totally lost as no nand flashed back will work so wondered if anyone could give any help?? Thanks

Nand.. http://www.megaupload.com/?d=98N6WN7H .

I think i should had dumped full 512mb Nand but only did 16. (Not sure) Thanks again
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Is that NAND dump AFTER you had flashed the ECC image? If so, there's no point in sharing it with anyone.

You NEED to flash back the original NAND you started with. Do you still have it?
 
F

Fanboy

Full Member
Sep 9, 2011
26
0
Thanks for quick reply Martin and Yes its the original Nand.
It goes to open in 360 Flashtool and then the program crashes with an error. Wondering if SMC is damaged
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
No, not at all.

I'm guessing you didn't read my noob roadmap thread before starting.

You've flashed the original image back, so re-dump with -r64 and upload the image.
 
F

Fanboy

Full Member
Sep 9, 2011
26
0
I know i know... call it being stupid and not thinking beforehand. Im not worried if console has to be binned but would like to hope it can be saved. Can a donor or something be used??
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Ok - just got it.

That's wrong too. Did you write the 16mb dump back to the console as I advised?

You only need to do

nandpro usb: -w64 nand.bin 0 50.

Then re-dump as -r64
 
F

Fanboy

Full Member
Sep 9, 2011
26
0
Yes i did and like i said something is really wrong here which is y im looking for a solution. The Nand opens in NandHealer but thats it.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
No, you didn't do as I asked. Somehow you've not written the first 16MB NAND back even though I gave you the commands to do so.

Luckily I still have the good 16MB file you initially uploaded.

I wrote it into your 64MB dump as a VNAND and it now opens in 360 Flash Dump Tool.

I've also created an ecc file for you.

http://www.multiupload.com/KUYSRBBBAY

So, extract and if you want to try to get it to glitch, write the ecc file:

nandpro usb: +w64 image_00000000.ecc

If you want to flash the original NAND back:

nandpro usb: -w64 nanddump.bin 0 50
 
F

Fanboy

Full Member
Sep 9, 2011
26
0
The 64mb Nand was dumped before doing RGH so assumed that would be ok. Sorry if that made things worse and thanks for the your work as just got nand and now gonna write back to see how i go.
 
F

Fanboy

Full Member
Sep 9, 2011
26
0
Ok but ive now removed the chip and just wanted to have console as standard to use on live so is this nand anygood for this?

also i uswe this command. C:\nandpro\NandPro usb: -w64 nanddump.bin 0 50 and i get could'nt open nanddump for read??
 
Last edited:
F

Fanboy

Full Member
Sep 9, 2011
26
0
Ok this has started to confuse a littla as i thought the 16mb nand was the original as that is all i had so therefore im now assuming the Nand you created for me will only work doing RGH correct?
 
C

CNGHacKSs

Full Member
Dec 14, 2011
86
0
new york,new york
Fanboy said:
Ok this has started to confuse a littla as i thought the 16mb nand was the original as that is all i had so therefore im now assuming the Nand you created for me will only work doing RGH correct?
Click to expand...
Yes you also did a to small read for a BB
 
Last edited:
You must log in or register to reply here.