cpu key not recodnised?
- Thread starter hayta
- Start date
OK heres what i did
i made you a Freeboot 12611 Nand Image
Your KV was corupt so i made one for you..
You will have to flash your DVD Drive With this info
DVD-Key: CB4181F6D0C15E2D4E85B3EB33AD97F6
DVD-Type:TSSTcorpDVD-ROM TS-H943Ams25
or read your dvd drive info and edit nand image..
You will be banned but you can unban with a new KV
Here is your File Flash it and let me know how it goes
http://www.megaupload.com/?d=IJ6APSMF
Use regular jtag wiring and havd dvd drive conected..
i made you a Freeboot 12611 Nand Image
Your KV was corupt so i made one for you..
You will have to flash your DVD Drive With this info
DVD-Key: CB4181F6D0C15E2D4E85B3EB33AD97F6
DVD-Type:TSSTcorpDVD-ROM TS-H943Ams25
or read your dvd drive info and edit nand image..
You will be banned but you can unban with a new KV
Here is your File Flash it and let me know how it goes
http://www.megaupload.com/?d=IJ6APSMF
Use regular jtag wiring and havd dvd drive conected..
i just dumed the original nand and my kernal is now showing 9199 is this normal because freeboot installed this before?
im trying to download but im getting this...The file you are trying to access is temporarily unavailable
sorry my mistake wasint logged into megaupload ill dump it and let u know asap thanks for all your help u deserve a medal for this if i can get this working.
i dont i made a kv for it..
thats why i said your banned and you need to flash your dvd drive cause i cannot get any info from your KV
thats why i said your banned and you need to flash your dvd drive cause i cannot get any info from your KV
i dont mind it.its all working thanks to you.i need to look into this kv building could be handy coz i have a jasper of my own which i picked up brand new i did the mistake of dumping the worng nand now the nand x is not reading and writing i tryed everything that i can to be able to write original nand back but it just wount have it.i shorted out the nand chip nothing. i belive i might off damaged the nand chip because its not even giving me the red light on the powerbrick anymore either.do you know any alternative soldering points where i can try dump nand back all i have is xmas lights at the moment
J2G
VIP Member
J2G
VIP Member
there is nothing wrong with your nand dump or key no bad blocks ether, i have made you one with your key and nand with coolshrimp no problem if you want to use that as its not band lol up to you here is Freeboot 12611 Nand Image with all your info if you want it for a rainy day lol http://www.megaupload.com/?d=FB0ZB6Q0
Last edited:
i appreciate all ur help thanks.can u guide me to a tutorial alternative points to solder to be able to dump my original nand on my jasper all im getting is controller error shorthing the pins on the nand chip dont work either.
J2G
VIP Member
well his KV is in the picture he posted along with his nand dump so he must have read the key wrong as i did it first go no errors also i checked his nand for bad blocks before i made it to remap them but it had none so i upped it if he wants it i know i would lol...
ALSO if Flash could remove/delete his info
Last edited:
J2G
VIP Member
bro im not fighting with you lol far from it only helping the guy out iv checked it used Nand healer on it also http://i56.tinypic.com/acxw9h.png
Key is fine made Freeboot with coolshrimp his good to go
Key is fine made Freeboot with coolshrimp his good to go
Last edited:
J2G
VIP Member
I ran his nand in nand healer just to see is it good to go came up with no bad blocks so i just made the Freeboot then a well he has two now to play with lol