Ok so I got a slim mobo from a buddy who lifted the original cpu rst point on bottom of board. He tried to fix it by using the alternate point by making a jumper to the (I think it is) r3d4 risitor under the heat sink on the top off the board and lifted that resistor so he replaced that with a 33 ohm half watt and the slim glithes pretty quick but occasionally experiences freezing, lagging, and this wierd pixaltion and consoles just freezes up. Could this be due th having the wrong resistor value as the replacement for the original r3d4 one. I can fix just dont know if this is proper resistor or that there is more issues going on that I am unaware of.