CPU_RST help ripped on virgin trinity

[redcatex]

Hi guys. long time ago i had trinity, untouched, it only beeped when i presed power, no lights no fans i used it for spares.
now i don't have anymore xbox'es so i thought i try to fix it. somehow managed to replace hana resistors, checked continuity, everything allright, kinda messy but thats not the problem.

xbox is virgin tried to read nand before but i wasn't able to.

so after replacing hana resitors, somehow it booted, but here is the biggest problem, before i got 0032, now i get green light with fans spinning or red light.

i was soldering r4d4 and left pad lifted, if someone could help me find alternative point for it.



can't get good photo so i took one from net and marked what's wrong.

so red line is i checked continuity between point near r4d4 and that trace at the bottom. but i managed to lift it too, thought that that's an alternative point.

so i lost r4d4 left pad and that at the bottom. sorry for my bad english.

so maybe someone have pic's with alternative point for that, cause i can't find it myself.

 

[ablegepu]

we need pictures of YOUR points in order to really help you. the r4d4 resistor has to be connected to the right pad and the left or the console wont boot, it also has to be connected to the other side of the board at point c5r11 at least so if you can take some pics of both r4d4 and ft4r2 and c5r11 then someone could possibly help you.

no that other point is not an alt point. its probably 1700 ohms away from being an alt point for cpu_rst. i highly suggest you get this to someone who knows what they are doing...

 

[redcatex]

i'll try to take some photos. but other side of the board is intact.