CR rev C missing pads

[unleashed1982]

How do guys

I have just got RGH repair in, the guy who tried to do it has somehow managed to completely destroy 2 of the 3 pads that you bridge.
Now obviously the CR wont glitch, is there a way of fixing this? or is it a new CR jobie?

 

[Ticallion]

There is definitely a schematic around here somewhere for missing pads on a Rev C, searching for it now.

Edit: Agghhh I can't find, I remember seeing it and thinking "that might come in handy in the future" as it had the whole board colour coded for alt.points, thing is I don't think it was posted initially in it's own thread, rather someone posted a link to it in another thread (still TX though), so tracing it down is a bit of a bastard.

Hopefully someone else will know what I'm referring to and link it here.

 

[unleashed1982]

There is definitely a schematic around here somewhere for missing pads on a Rev C, searching for it now.

Aye, but not for the rev c. the missing pads are 2 and 3, the 1's that need to be bridged for RGH1

 

[Teajunkie]

It was here but it was Rev B iir.

---------- Post added at 16:07 ---------- Previous post was at 16:05 ----------

Here you go
http://www.team-xecuter.com/forums/showthread.php?t=84778

 

[unleashed1982]

It was here but it was Rev B iir.

---------- Post added at 16:07 ---------- Previous post was at 16:05 ----------

Here you go
http://www.team-xecuter.com/forums/showthread.php?t=84778

Cheers TJ, but i don't think that will help

http://team-xecuter.com/coolrunner/revc/tx_revc_phat_rgh1.jpg

There are 3 little solder pads, bridge 2+3 for RGH1 and bridge 1+2 for RGH2. Solder pads 2 and 3 are missing

 

[Ticallion]

It was here but it was Rev B iir.

---------- Post added at 16:07 ---------- Previous post was at 16:05 ----------

Here you go
http://www.team-xecuter.com/forums/showthread.php?t=84778

I don't think it was that one, I remember this one having green with pink spots as one of the markers, I'm positive it was a rev C.

 

[Teajunkie]

No thats why i said it was a revb pinout

 

[unleashed1982]

Fixed it guys, just soldered a bit of kynar to the resistor and the other end to the trace of solder pad 2