RGH Cr3 Lite trinity not glitching right

[Jackz3885]

Hi, i have removed my old 'fake Chinese' copy of the cr(Xbox was booting fine) and installed a cr3 lite and flashed it with trinity.xsvf, the debug light flashes every 5 seconds but it just doesnt boot
LK1 short
LK2 short
LK3 Open
LK4 open

TX Product(s) used:CR3 Lite
Console Type:Trinity
NAND size: 16
Dashboard version: e.g 2.0.14699not need since it worked before installed new cr
CB version: e.g 5771not need since it worked before installed new cr
Screenshot of NAND details from J-Runner:not need since it worked before installed new cr
(attach an image to your post)
J-Runner log:not need since it worked before installed new cr
Image of Coolrunner:
Images of close-up soldering to motherboard:Not needed as it worked before i installed new cr
(attach images to your post)

Description of problem:
see above
Was the console working before you started: Y

Do you get a green debug light appear on the RGH chip every 4-5 seconds: Y

How long is the light on for each time:5 secs

 

[john mathews]

Hi, i have removed my old 'fake Chinese' copy of the cr(Xbox was booting fine) and installed a cr3 lite and flashed it with trinity.xsvf, the debug light flashes every 5 seconds but it just doesnt boot
LK1 short
LK2 short
LK3 Open
LK4 open

where is the pic of your install and theres is a template to fill out http://team-xecuter.com/forums/showthread.php?96474-TEMPLATE-RGH-JTAG-help

 

[Krafter]

There's several different timing files for the CR3 Lite. Use J-Runner to program it. And are you sure it's not a fake? CR3 Lites have been discontinued for about 2 years or so.

 

[Jackz3885]

where is the pic of your install and theres is a template to fill out http://team-xecuter.com/forums/showthread.php?96474-TEMPLATE-RGH-JTAG-help

Edited, why do you need pics of the install when it worked before i installed my new cr?

 

[john mathews]

Edited, why do you need pics of the install when it worked before i installed my new cr?

these are the rules no pic no template = no help

 

[Jackz3885]

There's several different timing files for the CR3 Lite. Use J-Runner to program it. And are you sure it's not a fake? CR3 Lites have been discontinued for about 2 years or so.

How can i know which i programmed it with ? it was just 'trinity.xsvf'

 

[Jackz3885]

There's several different timing files for the CR3 Lite. Use J-Runner to program it. And are you sure it's not a fake? CR3 Lites have been discontinued for about 2 years or so.

How can i know which i programmed it with ? it was just 'trinity.xsvf'

 

[Oggy]

Pics required.

 

[The Result]

Lol he is probably not showing pics because it's one of those $8 fakes on eBay.

 

[Jackz3885]

Lol he is probably not showing pics because it's one of those $8 fakes on eBay.

Well them 8$ fakes on eBay I had in it still work the real thing doesn't, its not fake because I checked the serial.

 

[Jackz3885]

Pics required.

I will post pics tomorrow UK time, but I tried my diligent cmod in and it boots within 15 seconds what am I doing wrong with cr?

 

[The Result]

We would answer that question but we have no pictures yet so until then.

 

[scott1503]

Well them 8$ fakes on eBay I had in it still work the real thing doesn't, its not fake because I checked the serial.

no one said the clones dont work but they are cheap and nasty mass produced crappy clones that normally crap out after a few months, not to mention they are all making money out of clones without doing all the hard work of designing there own products or coding. thats like me redesigning the xbox shell putting a microsft xbox in there and trying to sell it as my own product. it is just lame to disrespect the name of a company who spend a crap load of money on design and testing, and then expect to make profit out of it and expect recognition for someone elses work.

not making an argument just stating a point