lol no is the answer to that , and depending on the console you have yes all you need is cr4 and jrunner programmer , unless you have a slim corona
if you really want to glitch your console and go online , you could install a demon , boot off the console to go online or boot off the demon for off line , then you wont need a jrunner programmer you can read and write your nand with the demon , again unless you have a slim corona , you may need a nand R/W QSB and or a post fix adapter
Looks as is you ignored my OP in this thread and his answer from the last thread?Looks as if he ignored your last answer that you gave him in his previous thread so I doubt he will believe this one either.
Understood now thanks for the explanation. As my username suggest I know little about modding a Xbox 360.no it wont work , when you install a cr4 or any other mod chip , you read your nand create a new image using your nand and write the new one back , there is no stock image , if you take off power to the cr4 the console will not boot
Not been a smart ass here but if you do a little research, you can answer lot of your own questions. Also, if it was that easy then there wouldn't be a need for the Demon. That fact alone should tell you something.If you put a switch on the 5vSTBY to remove power to the mod will that not allow your xbox to be stock and playable online?
Note to self: ignore future advice.I'm sorry but I thought that this was the question.
Not been a smart ass here but if you do a little research, you can answer lot of your own questions. Also, if it was that easy then there wouldn't be a need for the Demon. That fact alone should tell you something.![]()
I'm not trying to be a d**k here...... All of these people answering your questions have done the research on their own.Note to self: ignore future advice.
I agree. following youtube vids or guides is fine. but u really need to understand each process of how it all works.An easy way of seeing if it would be possible would be to understand how the mod is done, and what is needed to revert it. If the only thing you did to get RGH to run was to solder the red 5V wire, then the answer to your question would be yes.
I use YouTube more as a tool then I do for entertainment. But.... It a reference only and just part of my research. A lot of dipshits on YouTube that don't know what they are talking about. Doing further research makes it easier to spot those.I agree. following youtube vids or guides is fine. but u really need to understand each process of how it all works.
Why don't you try it for yourself and let us know the result?So I asked this in another post and got laughed at but no explanation was given. If you put a switch on the 5vSTBY to remove power to the mod will that not allow your xbox to be stock and playable online?
I agree, youtube is hit or miss at best. I never trust any one video on there because any noob can make a youtube video but sometimes you have to scroll through hundreds of videos made by idiots before you find one that was actually made by someone that did his research and knows his sh*t. so best bet is trust yourself and read alot, do the research and then if you need visual instructions you will be able to differentiate between videos made by fu#[email protected] and videos made by the guys who did their research like you did.I use YouTube more as a tool then I do for entertainment. But.... It a reference only and just part of my research. A lot of dipshits on YouTube that don't know what they are talking about. Doing further research makes it easier to spot those.