ZEPHYR CR4 R-Jtag (Wont Boot To Xell)

coolshrimp

coolshrimp

1
VIP Member
Nov 25, 2009
596
33
Canada
So i have this zephyr that's being a pain any suggestions!!
Doing R-Jtag method with diodes and aud_clamp.
Cannot get past "Post 0F or Post 10"

I have tried all jumper settings:
-7&8 with 1-6
-7 with 1-6
-Post bit jumper all 3 positions
-Went over all solder points.
-Using Aud_Clamp with Diodes.
-Tested J2D2.1 & J2D2.2 both show 1.5K ohms

Console Type: Zephyr

Programmer Used: NAND-X

NAND Size: 16

Dashboard version: 16767

CB Version: 4569

Was the console working before you started: Y
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y



J-Runner Log:
Code: 
===================================================
Sunday, January 4, 2015 5:15:27 PM

J-Runner v0.3 Beta (7) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Version: 03
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 4569
Zephyr
Reading Nand to C:\Users\Coolshrimp\Desktop\J-Runner\output\nanddump1.bin
Reading Nand
Done!
in 2:08 min:sec

Reading Nand to C:\Users\Coolshrimp\Desktop\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Zephyr
Reading Nand
Jtag Selected
Nand Initialization Finished
Done!
in 2:08 min:sec

Comparing...
Nands are the same
Aud_Clamp Selected
R-Jtag Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully zephyr_hack_aud_clamp.bin
Version: 03
Flash Config: 0x01198010
Writing Nand
zephyr_hack_aud_clamp.bin
Done!
in 0:09 min:sec

Ratter Log:
Code: 
Version: 10
Power Up
Waiting for POST to change
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 0E 
Post 0F 
Post 01 
Post 01 
Post 0F 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 0E 
Post 0F 
Post 01 
Post 01 
Post 01 
Post 01 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 0E 
Post 0F 
Post 01 
Post 01 
Post 01 
Post 01 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 0E 
Post 0F 
Post 01 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 0E 
Post 0F 
Post 01 
Post 01 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 0E 
Post 0F 
Post 10 - Payload/1BL started 
Post 01 
Post 01 
Post 01 
Post 01 
Post 01 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 0E 
Post 0F 
Post 10 - Payload/1BL started 
Post 01 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 0E 
Post 0F 
Post 10 - Payload/1BL started 
Shutdown
Install Images:
IMG_6757.JPGIMG_6758.JPGIMG_6760.JPGIMG_6761.JPGIMG_6762.JPGIMG_6764.JPGIMG_6765.JPGIMG_6767.JPGIMG_6738.JPG
 
Last edited:
jsinger47

jsinger47

Troll Eating Dogs
Feb 6, 2011
8,133
128
Grand Rapids, MI
Looks like it is glitching to me potentially as you are getting POST 10.

You are likely getting 2E fails.

Let it get hot and/or give it a reflow.
 
ultimate360

ultimate360

VIP Member
Nov 11, 2013
786
48
MN, USA
Exact same issue here on a zephyr right now. Freshly reballed and works on stock, no issue there
 
coolshrimp

coolshrimp

1
VIP Member
Nov 25, 2009
596
33
Canada
I tried to do RGH2+ on this system and that dose not work either.

Ratter Log:
Code: 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C
Post 0D
 
Oggy

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,346
128
coolshrimp said:
I tried to do RGH2+ on this system and that dose not work either.

Ratter Log:
Code: 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 0A 
Post 0B 
Post 0C 
Post 0D 
Post 01 
Post 03 
Post 04 
Post 05 
Post 06 
Post 07 
Post 08 
Post 09 
Post 0A 
Post 0B 
Post 0C
Post 0D
Click to expand...
Is that on all DIP's ?
 
jsinger47

jsinger47

Troll Eating Dogs
Feb 6, 2011
8,133
128
Grand Rapids, MI
Considering that zephyr RGH2+ doesn't exist, i'm not surprised.

I don't see anywhere in the log where you used the recommended falcon files rather than zephyr?
 
coolshrimp

coolshrimp

1
VIP Member
Nov 25, 2009
596
33
Canada
jsinger47 said:
Considering that zephyr RGH2+ doesn't exist, i'm not surprised.

I don't see anywhere in the log where you used the recommended falcon files rather than zephyr?
Click to expand...
For the R-jtag i did try falcon as well sorry didn't add that in there. was same "post 10".
 
  • Like
Reactions: ultimate360
coolshrimp

coolshrimp

1
VIP Member
Nov 25, 2009
596
33
Canada
Not wasting anymore time on this guy, i returned him to stock. he now joins the flashed console pile.
 
  • Like
Reactions: ultimate360
You must log in or register to reply here.