CR4 RGH2+, no green LED from CR4

[MrKronic]

Console Type: Corona v1,
Programmer Used: JRP v2.0
NAND Size: 16 MB
Dashboard version: e.g 2.0.17489
CB Version: 13181
Screenshot of NAND details from J-Runner:

J-Runner log:

 ===================================================
Thursday, November 12, 2015 11:56:56 PM


J-Runner v0.3 Beta (8) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Reading Nand to C:\Users\Mista Kronic\Desktop\J-Runner\output\nanddump1.bin
Reading Nand
Done!
in 3:20 min:sec


Initializing nanddump1.bin..
Reading Nand to C:\Users\Mista Kronic\Desktop\J-Runner\output\nanddump2.bin
Corona
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:21 min:sec


Reading Nand to C:\Users\Mista Kronic\Desktop\J-Runner\output\nanddump3.bin
Comparing...
Nands are the same
Reading Nand
Done!
in 3:20 min:sec


Comparing...
Reading Nand to C:\Users\Mista Kronic\Desktop\J-Runner\output\nanddump4.bin
Nands are the same
Reading Nand
Done!
in 3:20 min:sec


Comparing...
Nands are the same
Glitch2m Selected
Glitch2 Selected
Comparing...
Nands are the same


===================================================
Friday, November 13, 2015 12:58:41 AM


J-Runner v0.3 Beta (8) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Corona
Glitch2 Selected
Nand Initialization Finished
Comparing...
Nands are the same
Checking Console..
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Comparing...
Nands are the same
ECC created
CR4 Selected
R-Jtag Selected
R-Jtag de-Selected
CR4 de-Selected
CR4 Selected


===================================================
Friday, November 13, 2015 2:26:56 AM


J-Runner v0.3 Beta (8) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Glitch2 Selected
Glitch2m Selected
Glitch2 Selected
CR4 Selected


===================================================
Friday, November 13, 2015 2:29:25 AM


J-Runner v0.3 Beta (8) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Checking Console..
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Version: 10
Flash Config: 0x00043000
Writing Nand
CORONA_16MB_CR4.ecc
Done!
in 0:18 min:sec




===================================================

Images of close-up soldering to motherboard (attach images to your post):

Detailed Description of the Problem: So I've installed a CR4 XL into a Corona v1 board set to RGH2+. However after the install, the CR4 board does not seem to glitch at all and only shows that it is getting power. The console on the other hand, powers up (no video though) so I presume there is nothing wrong with the motherboard. I've used one of the alt cpu_rst points instead of the recommended one since i don''t have access to good quality thermal paste at the moment. Also, if it helps, I've installed the CR4 after reading the NAND and writing the RGH2+ ECC that came with Jrunner. Please help. TIA


Was the console working before you started: Yes
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: No

 

[stucknvegas]

Are you sure thats a V-1
http://team-xecuter.com/forums/show...l-Corona-Motherboard-Identification-Solutions
I always use C-5-r11 for cpu-rst works every time ...order some paste

 

[MrKronic]

Yep, 16Mb NAND, 250HDD, Manufacture Date: 2011-8-16

Unfortunately, ordering paste isn't an option. Would be months before i can get my hands on some.

 

[stucknvegas]

you can remove the fan and heat sinc with out re-pasting That area never has problems
put the blue wire in the default location use caution when removing the Xclamp d0 not scratch the motherboard

 

[MrKronic]

Made the wires too short, so lifted off the C5R11 point entirely :/ Guess I'm stuck with that alt point for the time being.

Any other solutions? I tried the FT3T10 point too, and still no dice

 

[MrKronic]

Update: I just noted something odd with the ECC file. It seems that every time I try to flash the ECC for Corona 16MB CR4, an ECC of Trinity with CB 9188 is getting flashed instead. I've used the ECC files from "common" folder that came with Jrunner.

 

[stucknvegas]

find the magic files -----Sticky: Xecuter CR4 XL Magic SMC Files for RGH2+
load the correct file into the source buffer and tick write ECC

 

[stucknvegas]

Next thing re-install the stock nand don'[t create anything or select any buttons just hit write nand
unhook the red wire from CR-4
does boot retail ?

 

[MrKronic]

Next thing re-install the stock nand don'[t create anything or select any buttons just hit write nand
does boot retail ?

Figured out the original problem with a bit of help. It seems this issue was a lifted alt cpu_rst (the FT3T10 point got lifter). And as expected, RROD with 0032 on stock dash. Gotta have the point rebuilt I guess.

Any idea about the closest bridge point for rebuilding FT3T10 other than going topside?