Cr4 wont glitch now.

[amarzano42]

I have a corona v2 and as soon as I disconnected the qsb nand reader qsb it will not glitch at all. Do you have to leave the qsb there or something?

 

[BrockThunderjam]

No you dont, but you should post pictures of your install if you need help. If you're saying you removed the QSB after then it's possible you lifted a pad.

 

[amarzano42]

 

[BrockThunderjam]

And Post Out and CPU_RST? You may want to trim up the E solder pad point and clean it up.

 

[amarzano42]

I installed the qsb and it has been giving me 4,4,14,2,7,5,ect... like it was before I removed it.

 

[john mathews]

that means u need to tune ur cr4 the guides on here tell u how to its not hard

- - - Updated - - -

that means u need to tune ur cr4 the guides on here tell u how to its not hard/ glitch times shoul be no more then 3 if not your doing something wrong