cr4 xl C solder point break off

[kibaki]

hi everyone first time doing this and i mess up really bad.
i was soldering the yellow wire to the CR4 XL --> C POINT<-- but the solder broke the --> C POINT <-- OFF ! can i connect to yellow wire to one of the other POINTS? than you.


the yellow wire is not connected to anything in the picture just to be clear!

like to pic <a href="http://tinypic.com?ref=2a78j85" target="_blank"><img src="http://i63.tinypic.com/2a78j85.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

OR

 

[kibaki]

hi everyone first time doing this and i mess up really bad.
i was soldering the yellow wire to the CR4 XL --> C POINT<-- but the solder broke the --> C POINT <-- OFF ! can i connect to yellow wire to one of the other POINTS? than you.


the yellow wire is not connected to anything in the picture just to be clear!

like to pic <a href="http://tinypic.com?ref=2a78j85" target="_blank"><img src="http://i63.tinypic.com/2a78j85.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

OR

 

[Oggy]

There are alternative points, but if your soldering is anywhere near as bad as your photography, you'll ruin it completely.

 

[BootBoyer]

hi..in picture where is the yellow wire about which you are talking? That wire exist for which purpose?
Before connecting to any other point you must read the specifications of the board.

multi-layer pcb

 

[jweb6102]

you can solder it where i have indicated