Cr4 xL Corona v6 4g cant power on and boot to xell

[desperad]

Hello,
I have a problem to boot in the xell . I was able to read nand and write ecc file ,but after i can t power on console.
It is my first chip ,so maybe i sommething doing wrong. Could you please some one help thanks

Here are some pictures:






Best regard
Vladimir

 

[GeekHeat]

U need to fill in the template. U may also have the winbond chip. So u need to find out. If so then u need to tick winbond 4gb in jrunner.
http://team-xecuter.com/forums/showthread.php?148057-TEMPLATE-HOW-TO-ASK-FOR-CR4-HELP

 

[briggs01]

and look at other posts you will see that people are always being told to cut the wires down to fit , as short as poss

- - - Updated - - -

also get better close ups of the solder points and your post fix

 

[stucknvegas]

Please complete the template with clear photos and missing information ...We cannot help you with your current post

 

[desperad]

• Console Type: Corona v6 not windbond
• Programmer Used:nand x corona 4gb-v4 qsb
• NAND Size: 4GB
• Dashboard version: i have a latest dashboard
• CB Version: 090514 mfr date 2014-05-21
• Screenshot of NAND details from J-Runner: (attach an image to your post)
• J-Runner log
• 
• updflash.bin log (if applicable)
• ===================================================14. března 2015 18:44:25
  
  
  J-Runner v0.3 Beta (7) Started
  
  
  
  
  
  
  Checking Files
  Finished Checking Files
  Corona 4GB Manually Selected
  D:\
  Reading from D:\ to G:\xbox 360\programs\J-Runner v3 (5) Core Pack\output\nanddump1.bin
  Done!
  in 0:10 min:sec
  D:\
  Initializing nanddump1.bin..
  Reading from D:\ to G:\xbox 360\programs\J-Runner v3 (5) Core Pack\output\nanddump2.bin
  Too Many Bad Blocks
  Header is wrong..
  Corona 4GB
  Glitch2 Selected
  Nand Initialization Finished
  Done!
  in 0:10 min:sec
  Comparing...
  Can't check for bad blocks. No Spare data. Possibly Corona 4GB
  Can't check for bad blocks. No Spare data. Possibly Corona 4GB
  Nands are the same
  Corona 4GB Manually Selected
  Writing to D:\ from G:\xbox 360\programs\J-Runner v3 (5) Core Pack\common\ECC\CORONA_4GB_CR4.ecc
  Done!
  in 0:01:187 min:sec:ms
  
• Image of the CR4 XL
• 
• Images of close-up soldering to motherboard (attach images to your post)
• 
• Detailed Description of the Problem
• After read nand and compare it i write ecc file and i trying to start console to boot to xell without success . i would like to finish chip
• Was the console working before you started: yes console was brand new
• Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: N
• How long is the light on for each time (be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).

i can see only red light

If you need know enything else please let me know
BR
Vlad

 

[desperad]

Now i will try make the shorter wires we will see maybe it will help

 

[nofeloniesyet]

• Console Type: Corona v6 not windbond
• Programmer Used:nand x corona 4gb-v4 qsb
• NAND Size: 4GB
• Dashboard version: i have a latest dashboard
• CB Version: 090514 mfr date 2014-05-21
• Screenshot of NAND details from J-Runner: (attach an image to your post)
• J-Runner log
• View attachment 31624
• updflash.bin log (if applicable)
• ===================================================14. března 2015 18:44:25
  
  
  J-Runner v0.3 Beta (7) Started
  
  
  
  
  
  
  Checking Files
  Finished Checking Files
  Corona 4GB Manually Selected
  D:\
  Reading from D:\ to G:\xbox 360\programs\J-Runner v3 (5) Core Pack\output\nanddump1.bin
  Done!
  in 0:10 min:sec
  D:\
  Initializing nanddump1.bin..
  Reading from D:\ to G:\xbox 360\programs\J-Runner v3 (5) Core Pack\output\nanddump2.bin
  Too Many Bad Blocks
  Header is wrong..
  Corona 4GB
  Glitch2 Selected
  Nand Initialization Finished
  Done!
  in 0:10 min:sec
  Comparing...
  Can't check for bad blocks. No Spare data. Possibly Corona 4GB
  Can't check for bad blocks. No Spare data. Possibly Corona 4GB
  Nands are the same
  Corona 4GB Manually Selected
  Writing to D:\ from G:\xbox 360\programs\J-Runner v3 (5) Core Pack\common\ECC\CORONA_4GB_CR4.ecc
  Done!
  in 0:01:187 min:sec:ms
• Image of the CR4 XL
• View attachment 31623
• Images of close-up soldering to motherboard (attach images to your post)
• View attachment 31622
• Detailed Description of the Problem
• After read nand and compare it i write ecc file and i trying to start console to boot to xell without success . i would like to finish chip
• Was the console working before you started: yes console was brand new
• Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: N
• How long is the light on for each time (be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).

i can see only red light

If you need know enything else please let me know
BR
Vlad

get ur multimeter out and measure the resistance tween ground and ur postfix adapter pad,should be round 60k ohm

 

[desperad]

ok i will try it and i will let you know latter thanks mate

 

[Antalpromille]

So does it power up or doesn't it? Your first post say it doesn't power up but now it sounds like it does but doesn't boot xell.

 

[desperad]

no is not possible to power on and now i check the resistance between ground and ur postfix adapter pad and it is only 10 max 20 k ohm,
what should i do ?

 

[Antalpromille]

Reflash your nand dump and desolder the 5v wire from your CR4 and see if it boots.

 

[desperad]

ok i tried to reflash nand and i remove 5v wire from cr4 ,but the console still cant power on

 

[Antalpromille]

ok i tried to reflash nand and i remove 5v wire from cr4 ,but the console still cant power on

desolder the rest of the stuff then and see if it makes any difference, if it doesnt then youll have to look for any damage you may have caused.

 

[Oggy]

You have flicked the switch to x360 on the R/W adapter?

 

[stucknvegas]

Looks like he bridged some of the Resistors unnecessarily R2C6 and 7 and R2C4
How about a picture of that area after you clean it up
If the console does not start retail as suggested ..and the R/W set to 360 or removed
With the face plate hooked up do you have any lights when attempting to start
Also in your logs I see the error header is wrong I do not think that is normal