TRINITY CR4 XL Glitch Timing Issue.

[Orangeprofessor]

I thought that this issue was just on phats, but now I guess on slims too. There was an issue on phats where it would glitch successfully, but not be able to completely make it to the dashboard and glitch again. On my slim, this happened every once in a while as I thought it was a bug with J-Runner. Now it's happening every 6 glitches or so. Is there a special SMC that I should be using to slow down the glitch times? Is it the the dips I'm using? (Pics soon to come!)This issue is on an already glitched slim trinity console on 17150 that I wanted to get better boot times on.

Dips used: 4

JR Post log:

CR4 Selected
Version: 10
Power Up
Waiting for POST to change
Post 0C - .......... 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 0F - GLITCH SUCCESSFUL 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 0F - GLITCH SUCCESSFUL 
Post 11 - ....... 
Post 12 - ........ 
Post 13 - ......... 
Post 14 - .......... 
Post 15 - CONTINUING 
Post 16 - . 
Post 17 - .. 
Most Fails(cumulative): 0x0F
Shutdown
CR4 Selected
Version: 10
Power Up
Waiting for POST to change
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 0F - GLITCH SUCCESSFUL 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 0F - GLITCH SUCCESSFUL 
Post 11 - ....... 
Post 12 - ........ 
Post 13 - ......... 
Post 15 - CONTINUING 
Post 16 - . 
Post 17 - .. 
Most Fails(cumulative): 0x0F
Shutdown

 

[ablegepu]

Sounds just like THIS issue tr4ckerz is having...
Does his problem seem similar to yours?

 

[Orangeprofessor]

Sounds just like THIS issue tr4ckerz is having...
Does his problem seem similar to yours?

Not really. Do keep in mind that I just have the ECC written to the console. I think the problem i'm having is where the CR4 doesn't give the console enough time to boot before it resets and glitches again.

 

[tr4ckerz]

Mine Corona V3 behaves very similar as described in my thread.

Note that I faced the same behaviour with only ECC written. It did not boot Xell for the very first time I turned it ON, I just noticed that the debug LED stopped blinking but had no video output. What I did was restart the console and after that it did boot so I thought it means nothing. Later on I discovered the same problem with booting to dashboard.

I mentioned it HERE

 

[Krafter]

You could try the Speedup SMC by 15432. Don't know if it will work or not. Worth a try though.

 

[tr4ckerz]

Do you have a link for download? (sorry, I haven't heard of any speedup SMC before).

 

[Orangeprofessor]

Mine Corona V3 behaves very similar as described in my thread.

Note that I faced the same behaviour with only ECC written. It did not boot Xell for the very first time I turned it ON, I just noticed that the debug LED stopped blinking but had no video output. What I did was restart the console and after that it did boot so I thought it means nothing. Later on I discovered the same problem with booting to dashboard.



I mentioned it HERE

Are you sure we have the same problem? On my console, even if it fails a successful glitch, it'll reset and glitch again then boot with video.

 

[tr4ckerz]

No, then it's different.

 

[Krafter]

Do you have a link for download? (sorry, I haven't heard of any speedup SMC before).

Google it. You'll find it.

 

[Orangeprofessor]

Waiting for POST to change
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 0F - GLITCH SUCCESSFUL 
Post 10 - ...... 
Post 11 - ....... 
Post 12 - ........ 
Post 13 - ......... 
Post 15 - CONTINUING 
Post 16 - . 
Post 17 - .. 
TIMEOUT or SMC CORRUPTED - Shutting Down
Shutdown

The timeout happened after about 1 min of xell. What does this mean?