CR4 XL Question

[jparmyguy]

I know this isnt in form but i have one quick question. What does it mean if the debug light is a solid green and shuts off for a split second when it reset pulse?

 

[Nintendo]

I know this isnt in form but i have one quick question. What does it mean if the debug light is a solid green and shuts off for a split second when it reset pulse?

There's a problem with POST_OUT / CPU_Rst. But without the full history, pics and all that, that's just a guess.

 

[jparmyguy]

There's a problem with POST_OUT / CPU_Rst. But without the full history, pics and all that, that's just a guess.

Would this have anything to do with it?


Checking Files
Finished Checking Files
Version: 01
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 6723
Jasper 16MB
Reading Nand to F:\Documents\My JTAG\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\output\output\output\nanddump1.bin
Reading Nand
Done!
in 1:59 min:sec


Reading Nand to F:\Documents\My JTAG\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\output\output\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Jasper 16MB
Jtag Selected
Nand Initialization Finished
Reading Nand
Done!
in 1:59 min:sec


Comparing...
Nands are the same
Glitch2 Selected
CR4 Selected
Header is wrong..
* unpacking flash image, ....
Spare Data found, will remove.
Removed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6723
CB_B: missing
CD (image): 6723
CD (decrypted): 8453
* this image will be valid *only* for: xenon
* patching SMC...
Patching Jasper version 2.3 SMC at offset 0x12BA
* zero-pairing...
* constructing new image...
* encrypting CB...
* encrypting CD...
* base size: 70000
* No separate recovery Xell available!
* Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0x1154F (0x9550 bytes) CB_A 6723
0x11550..0x1754F (0x6000 bytes) CD 8453
0x17550..0xBFFFF (0xA8AB0 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
* Encoding ECC...Done!
------------- Written into output\image_00000000.ecc


Version: 01
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:09 min:sec

 

[john mathews]

no header is wrong just means ecc is written to it

 

[jparmyguy]

Also the point for the post out on rjtag method is burnt out.
Would I be able to bridge if i scratch trace?

 

[jparmyguy]

just buy a postout qsb

ok but would that affect that point being missing?

 

[Taijigamer2]

If u have burnt out that point u can either scratch trace and solder to that or resort to Rgh2 and use postout point next to it. If u have already burnt one point, I would resort to Rgh2.