Team-Xecuter Community
Hey Guyz ! first of all sorry for my bad english if any, i'm french 
.
i come here to explain my problem and have some information about modding an internal Hard disk drive sata custom connexion :
i've saw that many peoples have modded their xboxes to add a simple sata cable soldered on the XBOX 360 sata HDD connector (J1E1) connecting the sata cable pin to motherboard pins :
here i have a Falcon motherboard : initial Kernel was 13599 ; then i RGH'ed my mobo then i have updated to Kernel 16xxx .
i wanna put a 3.5" internal HDD inside DVD case ( because when your xbox is RGH/JTAG you dont need your dvd drive )
so i have tried this solution : http://beta.ivc.no/wiki/index.php/Xbox_360_Barebone_Hard_Drive
which gives me E68 errors , on all the startups i have there is at least a E68 or a non formated HDD detection , then when i select format, it brings back to the format menu in the dashboard ...
i tested out genuine Microsoft Hdd's and there is E68 error or non formated device detection screen .
sometimes the XBOX is very long to boot, then it result on E68 or a very long acces on the hard disk drive menu
i've cutted 3 sata cables, and that is not working at all ... i am on xbox modding since a while ! ( approx. 2 years ago , i know how to use a soldering iron and other soldering methods, i already done a homemade reball on Rams chips( xbox motherboard ) . i mean : i i'm not a beginner in modding purposes )
So if anyone know how to solve my problem i will be happy 4 ever
i have thinked another solution to solve my problem but the aim was to not "descruct" the XBOX case and use the existing connetors to realise this great mod !
dont heasitate to contact me by personal message or ask me to post pictures !
.i come here to explain my problem and have some information about modding an internal Hard disk drive sata custom connexion :
i've saw that many peoples have modded their xboxes to add a simple sata cable soldered on the XBOX 360 sata HDD connector (J1E1) connecting the sata cable pin to motherboard pins :
here i have a Falcon motherboard : initial Kernel was 13599 ; then i RGH'ed my mobo then i have updated to Kernel 16xxx .
i wanna put a 3.5" internal HDD inside DVD case ( because when your xbox is RGH/JTAG you dont need your dvd drive
)so i have tried this solution : http://beta.ivc.no/wiki/index.php/Xbox_360_Barebone_Hard_Drive
which gives me E68 errors , on all the startups i have there is at least a E68 or a non formated HDD detection , then when i select format, it brings back to the format menu in the dashboard ...
i tested out genuine Microsoft Hdd's and there is E68 error or non formated device detection screen .
sometimes the XBOX is very long to boot, then it result on E68 or a very long acces on the hard disk drive menu
i've cutted 3 sata cables, and that is not working at all ... i am on xbox modding since a while ! ( approx. 2 years ago , i know how to use a soldering iron and other soldering methods, i already done a homemade reball on Rams chips( xbox motherboard ) . i mean : i i'm not a beginner in modding purposes )
So if anyone know how to solve my problem i will be happy 4 ever
i have thinked another solution to solve my problem but the aim was to not "descruct" the XBOX case and use the existing connetors to realise this great mod !
dont heasitate to contact me by personal message or ask me to post pictures !