RGH damn freezing

[x23are]

i got a sb jasper.
i glitched it and i maje a freeboot whit 360 multibiulder 0.4.
i install dashlaunch manully.
but when drive or hard drive is connected it freezing.
what do i do?

 

[frayed]

please post quality pics of your soldering

 

[Utmad]

Insulate the wires on the bottom of the board and re route them from the coils

 

[H3rmaN]

please post quality pics of your soldering

+1, lets see the soldering please.

 

[x23are]

soory.but i havent a good camera.
but soldering is good. i rghed a bb jasper(16 mg) last friday.
it boot whit 683 cap in 5 sec (on cycle).
this sb have wire routing exactly similar to above bb jasper. it have 683 cap and booted in 5 sec.
the wires away from coils.

---------- Post added at 15:01 ---------- Previous post was at 14:58 ----------

Insulate the wires on the bottom of the board and re route them from the coils

i dont know what thing is suitable for insulate.

 

[noobnotforlong]

Just re route them pal bb jaspers usually boot instant aslong as you keep well away from CPU and coils

Sent from my HTC Desire Z using Tapatalk

 

[noobnotforlong]

Sorry for dubble post plz delete


Sent from my HTC Desire Z using Tapatalk

 

[Utmad]

Use insulation tape between the board and the wires

 

[oO Elite Oo]

best we can say is your soldering job has to be good enough other that it would be helpful with pictures of your soldering. Goodluck.

 

[x23are]

so thanks your supports and good forums.
i solved the problem by change cpu pll wire position (under xclamps) and insulate cpu rst wire whit tape and put tape in cpu rsts path.
so thanks again.