What about this? ... Do i need a new dummy?
guess im a little confused. JF shows my drive stock 0251 DVD key not found.
LITEON DG-16D2S dashboard update question
- Thread starter joshman
- Start date
guess im a little confused. JF shows my drive stock 0251 DVD key not found.
BL4K3Y
VIP Member
Dump your drive again using PhatKey and a Probe 3/PMT. JungleFlasher will prompt you to auto-load the firmware, click yes, check that the keys match, click MTKFlash32, click LiteOn Erase, click write and once the write verifies, finally click Outro ATA/Reset.
x360ccm
BANNED
did you make sure your key in target matched the key in source
http://team-xecuter.com/forums/showthread.php?t=66257
http://team-xecuter.com/forums/showthread.php?t=66301
post your jf log
balls!...thats not the easy answer... now how to remember how to connect all this crap.... there should be an old tut some where here right?...
x360ccm
BANNED
BL4K3Y
VIP Member
ok ... how screwed am i? just followed ubergeek tut, minus usbPro and went though the re-flashing motions back to 1.91 with the ck3 ... problem no DVD key... ummm, so whats next?... back to stock key dump? or is that even possible now? ... is my old dummy.bin worthless?... hosed?
log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.87 Beta (277)
Session Started Mon Sep 12 15:41:34 2011
This is a 32 bit process running on a 32 bit CPU
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 1 Com Ports.
Found 8 windows drives A: C: E: F: G: I: K: Z:
Found 2 CD/DVD drives F: G:
Drive is Lite-On..
Loading firmware file C:\Users\josh\Desktop\XBOX\JungleFlasher v0.1.84 Beta (250)\firmware\Dummy.bin
MD5 hash: 9d2e10eba0be908a71e62a4635284c6f
Inquiry string found
Identify string found
Drive key @ 0xA030 F06C98B74790132AEF2F5D761044E54D
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: iXtreme v1.51-12x-
Loading firmware file C:\Users\josh\Desktop\XBOX\JungleFlasher v0.1.87 Beta (277)\iXtreme_LTplus_v1.91_and_Stock_Firmware_Pack\Firmware\LTPlus-025v1.91.bin
MD5 hash: 5b94b528591d1028f6b1a9d7884c7a55
Genuine LT plus v1.91
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 1.91
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Target rev is LT 02510C, serial info not copied
Drive is Lite-On..
Drive is Lite-On..
Sending Lite-On-Erase request to port 0xEC00
..............
Drive returned Status 0xD0
.........
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0xEC00
SPi flash found with Status 0x72
Sending Chip Erase to Port 0xEC00
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0xEC00
Drive is Lite-On..
log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.87 Beta (277)
Session Started Mon Sep 12 15:41:34 2011
This is a 32 bit process running on a 32 bit CPU
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 1 Com Ports.
Found 8 windows drives A: C: E: F: G: I: K: Z:
Found 2 CD/DVD drives F: G:
Drive is Lite-On..
Loading firmware file C:\Users\josh\Desktop\XBOX\JungleFlasher v0.1.84 Beta (250)\firmware\Dummy.bin
MD5 hash: 9d2e10eba0be908a71e62a4635284c6f
Inquiry string found
Identify string found
Drive key @ 0xA030 F06C98B74790132AEF2F5D761044E54D
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: iXtreme v1.51-12x-
Loading firmware file C:\Users\josh\Desktop\XBOX\JungleFlasher v0.1.87 Beta (277)\iXtreme_LTplus_v1.91_and_Stock_Firmware_Pack\Firmware\LTPlus-025v1.91.bin
MD5 hash: 5b94b528591d1028f6b1a9d7884c7a55
Genuine LT plus v1.91
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 1.91
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Target rev is LT 02510C, serial info not copied
Drive is Lite-On..
Drive is Lite-On..
Sending Lite-On-Erase request to port 0xEC00
..............
Drive returned Status 0xD0
.........
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0xEC00
SPi flash found with Status 0x72
Sending Chip Erase to Port 0xEC00
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0xEC00
Drive is Lite-On..
what's wrong with that log????......looks fine to me 
If it's this
So long as when u loaded the dummy source and CFW target and spoofed you checked to make sure the keys matched (which I'm sure they will have done) you should be fine
If it's this
- ignore it this is normal
So long as when u loaded the dummy source and CFW target and spoofed you checked to make sure the keys matched (which I'm sure they will have done) you should be fine
Last edited:
My concern is with this. I did not dump a new dummy after updating the dashboard.
As of right now nfs boots and is playable. So all is good with the xbox; however will not having a new dummy bite me in the arse down the road when its time to update and flash again?...
BL4K3Y
VIP Member
Even if the dummy.bin was retrieved before updating the dashboard, it's fine. The only thing of value inside that dummy.bin is your drive key and as long as you keep it safe, you will always be able to replace your drive in the future.