dead controller

tyghtfckr

Noob Account
Nov 17, 2004
5
0
Connecticut US
when i try to use my controller to move down to the "load bios from disc" it wont let me, so i pluged in my old hhd and it works fine, but i put the new hhd in and my controller wont work, it doesnt have power going to it, please help
 

judochopshop

Noob Account
Nov 16, 2004
1
0
MS
I had the same problem and found it was the aftermarket controller I was using wasn't supported.
 

Chewy1812

Noob Account
Nov 18, 2004
1
0
Germany
I had the same problem when I opened the xbox I found that I disconnected the control card from the mother board check and make sure it is secure
 

Cueball12

Junior Member
Nov 19, 2004
11
0
South Carolina
If you are using a new controller S (the smaller one from M$) on a 1.6 box it sometmes will not work. Try it with an older style controller from M$. That worked for me.
 

lightning10101

VIP Member
Oct 22, 2004
556
0
england
well dont use after market controlers n just check everything is plugged in and working 1st then if all else fails buy a controler that sum1 says works. :D
 

keeper05

Noob Account
Nov 11, 2009
9
0
Clarification needed with manually patching SSv2 and DMI

My backup of Halo 3 ODST was ripped with a Kreon drive so naturally it has ssv1. The ssv2 file on ABGX, when injected by Xbox Backup creator, comes back as not matching my xex. I found an ss and DMI combo that does not return this error under Xbox Backup Creator when injected. I can only assume that it does match the xex.

When this is run through abgx, stealth check passes but fails verification because no ini features this ss/xex pairing.

Does this mean it is NOT safe for live? Am I wrong to assume that this SS matches my xex since I did not receive the error with Xbox Backup Creator?

Thanks for the help.
 

karlosfandango

Junior Member
Oct 24, 2003
21
0
Re: Clarification needed with manually patching SSv2 and DMI

I'm not sure if this is what you're asking, but ssv1 iso files CANNOT be patched to ssv2. The only way to get an ssv2 iso is to rip it using an xbox 360 drive with 0800 firmware, or ixtreme 1.6 (which has 0800 firmware dumping on it)

Then, you just run through your rip and burn the same way you would if you were using a kreon drive.
 

keeper05

Noob Account
Nov 11, 2009
9
0
Re: Clarification needed with manually patching SSv2 and DMI

Weird because I see conflicting posts on various boards where people talk about injecting SSv2.bin files into ISOs. I think Braveheart explains how to do this using ABGX

Link to SSv2 Question Thread

Yet, I have also read people stating that you cannot patch an ISO to SSv2. The confusion is part of what initially prompted my post.
 

CamaroZ28

Full Member
Nov 15, 2003
91
0
Re: Clarification needed with manually patching SSv2 and DMI

keeper05 said:
Weird because I see conflicting posts on various boards where people talk about injecting SSv2.bin files into ISOs. I think Braveheart explains how to do this using ABGX

Link to SSv2 Question Thread

Yet, I have also read people stating that you cannot patch an ISO to SSv2. The confusion is part of what initially prompted my post.
Your right according to the tutorial that Braveheart posted it is possible to inject SSv2.bin files into the iso ,iv don it myself and it passes in ABGX but iv also read posts that states that an iso can not be patched to SSv2 only bi re ripping the game itself.My other question is if you inject an is that was ripped with SSv1 with SSv2 and verify that iso in ABGX and all passes is that patched iso now safe to play on live ????
 

keeper05

Noob Account
Nov 11, 2009
9
0
Re: Clarification needed with manually patching SSv2 and DMI

killerxclub said:
keeper05 said:
Weird because I see conflicting posts on various boards where people talk about injecting SSv2.bin files into ISOs. I think Braveheart explains how to do this using ABGX

Link to SSv2 Question Thread

Yet, I have also read people stating that you cannot patch an ISO to SSv2. The confusion is part of what initially prompted my post.
Your right according to the tutorial that Braveheart posted it is possible to inject SSv2.bin files into the iso ,iv don it myself and it passes in ABGX but iv also read posts that states that an iso can not be patched to SSv2 only bi re ripping the game itself.My other question is if you inject an is that was ripped with SSv1 with SSv2 and verify that iso in ABGX and all passes is that patched iso now safe to play on live ????
Not sure. That is my basis of my question. Is the patching some sort of cosmetic change in ABGX only, to make people feel better or does patching with an ssv2 from an 0800 rip actually have the desired effect?
 

Acidh

Loyal Member
Nov 14, 2003
412
0
Re: Clarification needed with manually patching SSv2 and DMI

Ya really not much solid info on this subject, I'm curious as well.