Your box, your mod - the only one that needs to like it is you. Personally, I think it looks good - I was just a bit unsure about using a fan guard without a fan. Creative - but not something I would have done.altec said:
Dead Metel
- Thread starter altec
- Start date
ok well heres my project
the part's.
1 xbox my box is a 1.1
1 mod chip i an going to use a 2.6
1 led fan i used red
1 laser leds red same
1 neon plasma tube red same 12''
2 fan grill's i use wire but any well work
1 hard drive i'm going to use a 120gb maxtor
that is all the big part's
the small part's
1 fan adater thing
1 roll of 20g wire any color
sand paper 220,320,400,600,1200 grit's
1 sanding block
1 evox bio's i'm using m8 but m7 well work
1 evox i'm using fire****ers evox autoinstall
that about it.
tool's
dremel or clone
dremel bit's
really small screw driver's
soldering iron
solder
hot glue gun
sharp knife
wire cuter's
some thing's i can't think of rite now lol
now heres the lite mod all wired up
http://img91.exs.cx/img91/4870/darkonsmall.jpg
heres the clear jewel
http://img22.exs.cx/img22/2390/jewel2small.jpg
ok heres the top with most of the crap for it layed out
the pole was a cb thing and the little fan grill i'm going to drill a hole and put it on the back side for a small dvd window and the 80mm grill just to go over the all clear jewel.
http://img95.exs.cx/img95/8770/closeup3.jpg
close up
http://img95.exs.cx/img95/8703/closecloseup2.jpg
all for now
ps,dead metel is the way i spell it.
update 11/27/2004
ok i'm going to start all the cuting and grind'ing to day so look back to night and i hope to post the pics that is if the site don't go down lol
but does any one know why it has ben going down alot?
update 11/27/2004 (later that day)
ok got the dvd grill cut looks hot.
[glow=red,2,300](warning)hole saws are not to be used by little moders if a hole saw locks up it can brake your riste(warning)[/glow]
in this pic you can see the last bit of rebel skin (cry) lol
http://img130.exs.cx/img130/1945/rebelinplace.jpg
heres it is still have a little sanding to do but it looks so cool.
and were the hole is was a flok i got really lucky on that one lol.
http://img130.exs.cx/img130/8369/blackinplace.jpg
one more pic of it.
http://img130.exs.cx/img130/5800/blackya.jpg
updates 12/03/04 time 10:00
ok got some work done its all paint'ed up and it looks so cool.
well the led light thing i paint'ed red coz no one does that and looks cool lol.
don't no why i just paint'ed the one part white but looks cool.
paint'ed the dvd cover red and sanded the XBOX logo off clean
and paint'ed the top and front.
http://img114.exs.cx/img114/3895/95-drives.jpg
http://img114.exs.cx/img114/6956/e2-front.jpg
http://img114.exs.cx/img114/7156/87-main.jpg
http://img114.exs.cx/img114/6661/a0-top.jpg
if you can see the spots that don't have wrinkle paint that was planed.
THERE HAPPY
the part's.
1 xbox my box is a 1.1
1 mod chip i an going to use a 2.6
1 led fan i used red
1 laser leds red same
1 neon plasma tube red same 12''
2 fan grill's i use wire but any well work
1 hard drive i'm going to use a 120gb maxtor
that is all the big part's
the small part's
1 fan adater thing
1 roll of 20g wire any color
sand paper 220,320,400,600,1200 grit's
1 sanding block
1 evox bio's i'm using m8 but m7 well work
1 evox i'm using fire****ers evox autoinstall
that about it.
tool's
dremel or clone
dremel bit's
really small screw driver's
soldering iron
solder
hot glue gun
sharp knife
wire cuter's
some thing's i can't think of rite now lol
now heres the lite mod all wired up
http://img91.exs.cx/img91/4870/darkonsmall.jpg
heres the clear jewel
http://img22.exs.cx/img22/2390/jewel2small.jpg
ok heres the top with most of the crap for it layed out
the pole was a cb thing and the little fan grill i'm going to drill a hole and put it on the back side for a small dvd window and the 80mm grill just to go over the all clear jewel.
http://img95.exs.cx/img95/8770/closeup3.jpg
close up
http://img95.exs.cx/img95/8703/closecloseup2.jpg
all for now
ps,dead metel is the way i spell it.
update 11/27/2004
ok i'm going to start all the cuting and grind'ing to day so look back to night and i hope to post the pics that is if the site don't go down lol
but does any one know why it has ben going down alot?
update 11/27/2004 (later that day)
ok got the dvd grill cut looks hot.
[glow=red,2,300](warning)hole saws are not to be used by little moders if a hole saw locks up it can brake your riste(warning)[/glow]
in this pic you can see the last bit of rebel skin (cry) lol
http://img130.exs.cx/img130/1945/rebelinplace.jpg
heres it is still have a little sanding to do but it looks so cool.
and were the hole is was a flok i got really lucky on that one lol.
http://img130.exs.cx/img130/8369/blackinplace.jpg
one more pic of it.
http://img130.exs.cx/img130/5800/blackya.jpg
updates 12/03/04 time 10:00
ok got some work done its all paint'ed up and it looks so cool.
well the led light thing i paint'ed red coz no one does that and looks cool lol.
don't no why i just paint'ed the one part white but looks cool.
paint'ed the dvd cover red and sanded the XBOX logo off clean
and paint'ed the top and front.
http://img114.exs.cx/img114/3895/95-drives.jpg
http://img114.exs.cx/img114/6956/e2-front.jpg
http://img114.exs.cx/img114/7156/87-main.jpg
http://img114.exs.cx/img114/6661/a0-top.jpg
if you can see the spots that don't have wrinkle paint that was planed.
THERE HAPPY