Dead zephyr after failled rgh(error 0102 rrod no video and sound)

[bulldozer666]

Hi all,
I have a zephyr motherboard with RRoD, after a failed rgh.
All rgh PCB tracks were burned, but I recovered.
Now he goes on and immediately gave RRoD 4142 code is a code 0102.
I tried a new standard NAND image to make it flashed into the chip.
Now it takes a little longer before I get RRoD.
Also, I have no picture and sound.
I also performed the clamp fix.
Can anyone please help?
I RRoD because I have a badflash?
How do I find out? I just want this console standard working again and get converted to rgh.

 

[KhaineGB]

0102 sounds like a GPU error that Zephyr boards are known for more than anything to do with the RGH.

 

[paul.86]

But can you boot xell? if its taking time to rrod it could be ldv

Sent from my HTC Vision using Tapatalk

 

[bulldozer666]

I have no picture and sound, nothing, it is because of the bad flash?
Is this normal for a 0102 RRoD?
I have the cpu key and the kv.bin of NAND.
How can I use a donor nand this xbox back to life?
I'll also read about LDV.
I can not boot Xelle, for I have no cool runner or something.
I own only the reader spi nand.

 

[bulldozer666]

I am getting rrod with code 0102 after 20 sec.
And now i get 2 rrod lights with code 4413 (0013)
Is it fixible?please help!

 

[Mj Joker]

Error you have should be fixable look for profesinal help.

 

[itchyf1ngaz]

don't even bother with the zephyr. you will dump more money trying to fix it. it's a money pit. just count your loss and get a jasper..just saying

 

[Martin C]

Reball/replace the GPU. You can try a reflow first in case it's just a connectivity issue.

 

[bulldozer666]

I now have 0022 error and no screen and video after 1 oven reflow.
I try the reflow again.
Is it normal,that i have no screen and audio? only flashing lights?

---------- Post added at 10:46 ---------- Previous post was at 10:40 ----------

can i create a new nand file?
I think the flash is bad,maybe that`s why i have no screen and sound?

 

[Martin C]

I now have 0022 error and no screen and video after 1 oven reflow.
I try the reflow again.
Is it normal,that i have no screen and audio? only flashing lights?

---------- Post added at 10:46 ---------- Previous post was at 10:40 ----------

can i create a new nand file?
I think the flash is bad,maybe that`s why i have no screen and sound?

I think you screwed the console the second you decided that sticking it in the oven was a good idea.

Another one for the bin....

 

[CEEHRIS604]

chuck it and get a new one!