I'm looking to install a DemoN and a Coolrunner Rev C in my Trinity Slim. My console is running the latest dash kernel (16767). Does my dash kernel matter? Would I be able to get going with only the DemoN and Rev C (with the CPU Reset Cleaner)? Should I install the Coolrunner or the DemoN first? I have experience with soldering and taking consoles apart but I'm a noob when it comes to stuff like this. Any help would be greatly appreciated!
ANSWERED DemoN + Coolrunner Rev C Questions
- Thread starter Carbyn
- Start date
ultimate360
VIP Member
That should be all you need. Put the demon in first and remember to update its firmware to 1.04, then when its installed you can read your xboxs nand through the demon and write as well. Then you install the cool runner after the ecc nand image has been written to the Xbox nand using the demon and original dumps. When you program the cool runner, be sure to click the box that says "demon installed" before you hit program, this way the demon will be able to control the cool runner. All dashes can be rgh2 hacked, so you're fine there. Any other info you need to know can be found here: http://team-xecuter.com/forums/showthread.php?t=78885 
Thanks a bunch!That should be all you need. Put the demon in first and remember to update its firmware to 1.04, then when its installed you can read your xboxs nand through the demon and write as well. Then you install the cool runner after the ecc nand image has been written to the Xbox nand using the demon and original dumps. When you program the cool runner, be sure to click the box that says "demon installed" before you hit program, this way the demon will be able to control the cool runner. All dashes can be rgh2 hacked, so you're fine there. Any other info you need to know can be found here: http://team-xecuter.com/forums/showthread.php?t=78885
ultimate360
VIP Member