DemoN Firmware v1.04 ** FEB 13TH 2013**

Gohakon

Noob Account
Feb 26, 2013
7
1
Lyon (France)
Note: DemoN has a failsafe feature that can isolate firmware related problems with the following procedure:

- un-plug the Xbox 360 power supply
- press the DemoN push-button and keep it pressed all the time
- plug-in the power supply (while still keeping the push-button pressed)

Demon is now in forced bootloader mode. If it turns up in J-Runner or Toolbox now, you can downgrade to firmware version 1.02 and retry the latest update. Maybe there was some kind of data corruption, while the update was applied.

If you still cannot see Demon in either program, than it's definitely not firmware related.

This is pretty helpful in order to narrow down possible firmware related issues
I have a demon on my trinity motherboard with firmware version 1.0. I works fine.
I would like to upgrade to the latest version 1.04 but i have to get some precisions before.

  • is there any befict to update the demon firmware ?
  • if so, is there any risque to damage the demon during the update process ?
  • is it possible de reinit the demon after a fail update.

For the last question, it seems possible but where i can download previous firmware like 1.02 or 1.00

Thanks
 
Last edited:

Gohakon

Noob Account
Feb 26, 2013
7
1
Lyon (France)
I have a demon on my trinity motherboard with firmware version 1.0. I works fine.
I would like to upgrade to the latest version 1.04 but i have to get some precisions before.

  • is there any befict to update the demon firmware ?
  • if so, is there any risque to damage the demon during the update process ?
  • is it possible de reinit the demon after a fail update.

For the last question, it seems possible but where i can download previous firmware like 1.02 or 1.00

Thanks
Please, someone for help me ????
 

XmodsUK

Full Member
May 29, 2010
52
0
UK
I upgraded no problem, but would be nice to have option to roll back to early FW if required. Can't find download link anywhere.
 

Gohakon

Noob Account
Feb 26, 2013
7
1
Lyon (France)
I upgraded no problem, but would be nice to have option to roll back to early FW if required. Can't find download link anywhere.
The option to rollback exists.... see bellow what Xecuter said about this feature. Unfortunately, impossible to find download link to an old firmware version like 1.02 to use with this failsafe feature.

PLEASE HELP !!!!!!!!!!!!!!!!!!!!!!

NOTE: DemoN has a failsafe feature that can isolate firmware related problems with the following procedure:

- un-plug the Xbox 360 power supply
- press the DemoN push-button and keep it pressed all the time
- plug-in the power supply (while still keeping the push-button pressed)

Demon is now in forced bootloader mode. If it turns up in J-Runner or Toolbox now, you can downgrade to firmware version 1.02 and retry the latest update. Maybe there was some kind of data corruption, while the update was applied.

If you still cannot see Demon in either program, than it's definitely not firmware related.

This is pretty helpful in order to narrow down possible firmware related issues
 

stefanounick

VIP Member
Jun 9, 2010
1,178
118
Orbiting Sun
Might seem like a daft question this to you gods of modding but what option do I choose in jrunner to install this firmware? Flash coolrunner? Thanks
since you fail to see the obvious, why don't you go have a read of the app's userguide?

Sent from my Nexus 7
 

lio_x

VIP Member
Oct 4, 2011
376
0
This is the latest firmware v1.04 for the Xecuter DemoN

Please use J-Runner or DemoN ToolBox to update

Tons of bug fixes and new features such as Jasper BB 256/512 Support (Upgrade Kit Required) and the new "!DSWITCH" command that allows toggling of the NAND-flash. This new command is sent from software running on the Xbox 360 over serial interface to DemoN. (1 extra wire required - X8 needs to be soldered to 3V3 non-standy - wiring images can be found here)

The new J-Runner now also supports generating 16MB images from a 256MB or 512MB dump :)

The Xecuter DemoN now supports ALL non-MMC Xbox 360s !

NOTE: DemoN has a failsafe feature that can isolate firmware related problems with the following procedure:

- un-plug the Xbox 360 power supply
- press the DemoN push-button and keep it pressed all the time
- plug-in the power supply (while still keeping the push-button pressed)

Demon is now in forced bootloader mode. If it turns up in J-Runner or Toolbox now, you can downgrade to firmware version 1.02 and retry the latest update. Maybe there was some kind of data corruption, while the update was applied.

If you still cannot see Demon in either program, than it's definitely not firmware related.

This is pretty helpful in order to narrow down possible firmware related issues
where can i find FW 1.02?
i updated to 1.04 and the console not powering up on the glitched nand
the stock is working and the R\W option on both nands have no issue
 
Last edited:

xr60noscope

Noob Account
Jun 24, 2014
1
0
Yeah Im Kinda A NEWB But what dash is the DemoN And Coolrunner and **** supporting i have a trinity motherboard
 

aaronouthier

Full Member
Apr 17, 2015
38
8
California
Download link is gone. I bought a Phat demon a few years ago, but never installed it. Just got the drivers installed. Trying to find the firmware update. I know it is an old product. Kind of an old thread also. I seem to be on original 1.0 firmware.
 
  • Like
Reactions: Xecuter