Demon not swtiching on coolrunner on rgh nand

[VitalPros]

The coolrunner I am using does not glitch when the RGH nand is on with demon. The original nand boots fine. When I programmed the coolrunner I clicked demon installed. When I do that the RGH nand will not glitch. If I do not click demon installed the rgh nand glitches but the original nand will not boot. I have the points set up on the coolrunner and demon to shut off when the RGH is not active but it seems as if it does not turn back on.
The soldering works fine. I know it does not look the best. It all works. Just not in the way it is suppose to. I also have a DGX v1.1 That was useless because it would not boot. So I attempted the Rev c and wala it works. Demon soldering is fine i am able to read and write.

Log:
Initializing nanddump1.bin..
CpuKey is Correct
Added Key to Database
Nand Initialization Finished
Load Files Initiliazation Finished
16203
Started Creation of the 16203 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.07.561
---------------------------------------------------------------
building glitch image
---------------------------------------------------------------
L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\014382304508\updflash.bin image built, info:
---------------------------------------------------------------
Console : Trinity
NAND size : 16MiB
Build : Glitch
Xell : power on console with console eject button
Serial :
ConsoleId :
MoboSerial:
Mfg Date : 10/31/2010
CPU Key :
1BL Key :
DVD Key :
CF LDV : 14
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\014382304508
Image is Ready
Version: 03
Flash Config: 0x00023010
Writing Nand
updflash.bin
Done!
in 2:10 min:sec


Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
XBOX360
manufacturer for code FF not found


DEMON
Hardware : Demon Slim
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:41 min:sec


Initializing updflash.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
DEMON
Hardware : Demon Slim
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:37 min:sec


Current: XBOX
Switching to DemoN
Success
Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
XBOX360
Hardware : Demon Slim
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:39 min:sec


Programming Coolrunner
L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\common\xsvf\trinity_en.xsvf
USB XSVF Player Initialized
Xilinx Device ..... [NOT DETECTED]
Programming Coolrunner
L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\common\xsvf\trinity_en.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\common\xsvf\trinity_en.xsvf
Sending Out Packets .........
Success
Initializing updflash.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
DEMON
Hardware : Demon Slim
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:36 min:sec


Current: DemoN
Switching to XBOX
Success
Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
XBOX360
Nand Initialization Finished
Hardware : Demon Slim
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:37 min:sec


Programming Coolrunner
L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\common\xsvf\trinity_en.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\common\xsvf\trinity_en.xsvf
Sending Out Packets .........
Success
Programming Coolrunner
L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\common\xsvf\trinity.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\common\xsvf\trinity.xsvf
Sending Out Packets .........
Success
Programming Coolrunner
L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\common\xsvf\trinity_en.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: L:\Users\VitalPros\Desktop\J-Runner v02 (271) Core Pack\common\xsvf\trinity_en.xsvf
Sending Out Packets .........
Success

 

[koetjuh]

did you connect the ribbon to the cr?

 

[big_ted]

Are you keeping original dump on stock nand and rgh on to demon ?

Ted

 

[Nadles]

Manufacture code FF I believe normally means a short. You're pictures will not load on Tapatalk, but you already said your soldering doesn't look how it should.

I hope you used flux and the correct amount of solder, you should check your points with a multimeter for shorts and such. Also is the Demon on XB? And is the Demon's ribbon cables connected really good? And the external grounded? I believe I've had similar problems due to soldering issues and that ribbon cable.

Edit: Your pictures popped up now. You need to clean a look of that flux and check for shorts. A clean install works wonders. Check with a multimeter.

Also connet the Rev C by the Demon's ribbon cable and the board that came with it. Solder the from the enable pad on the little board that came with the Demon to the Rev C. Then program it.

 

[jsinger47]

Does stock boot from the demon? If not, then your soldering is the issue.