Demon on corona

[Netkar]

Hello boys, we know that slim demon is compatible with corona and now corona are glitchable someone can tell how install demon? I know that corona need wires and not the qsb.
Thanks for support

 

[WalangAlam]

incoming. wait for the tut.

 

[BL4K3Y]

I do believe that a Corona DemoN install will be done using wires only.

You can probably expect to see a tutorial as soon as the CoolRunner 3 has gone public .

 

[crashxtrme]

For the 4gb corona boards we will need the demon and coolrunner II. Cant read them with nand x:facepalm:

 

[lio_x]

i hope it will be out soon - i need it fast

 

[TilVl]

Honestly you could most likely map it out. I don't have a cornoa to take a look. But the points should be to hard to find.

If any one has hi res scan ill take a look.

Sent from my SGH-T839 using Tapatalk

 

[Netkar]

I hope that new tutorial Will be' released soon.. Waiting the new cr3 we can use cr rev c with new qsb and cpu rst fixer released this week but many customers want the demon in Xbox so we wait

 

[metalfan]

Did a google search and came up with these pic's for corona dual nand, requires wire install.

 

[trippy86]

or these

 

[metalfan]

or maybe these too...hehe

 

[krayziexploiter]

Did the corona demon install a couple of days ago using a mix of the TX demon slim instructions and the above corona points. It's actually working fine. Can flash/read both nands and can program coolrunner. Only thing is that the coolrunner doesn't disable with retail nand which is because the Demon Coolrunner XSFVs aren't released yet. When retail the coolrunner glitches once and then continues to load the retail nand so it does work. Corona glitches fine too. Mostly one or two cycles.

 

[Netkar]

Good news can We have your install pics? Tnx

 

[krayziexploiter]

I have site problems and proxy giving me troubles uploading images. Anyway here's a link:

 

[TilVl]

Whoa....

Sent from my SGH-T839 using Tapatalk

 

[bernzburnz]

Sweet :smile:

 

[SOD_FrosT]

O_O. Wow.

 

[metalfan]

Awesome, wish I had a corona to try this on...

 

[telis93]

Did the corona demon install a couple of days ago using a mix of the TX demon slim instructions and the above corona points. It's actually working fine. Can flash/read both nands and can program coolrunner. Only thing is that the coolrunner doesn't disable with retail nand which is because the Demon Coolrunner XSFVs aren't released yet. When retail the coolrunner glitches once and then continues to load the retail nand so it does work. Corona glitches fine too. Mostly one or two cycles.

I have a corona 4 gb, will this work?
And what coolrunnuer did you use rev B or C?
And what rgh is this 1 or 2?
I am a noob here so forgive me if my questions are stupid.

 

[hersheys247]

I have a corona 4 gb, will this work?
And what coolrunnuer did you use rev B or C?
And what rgh is this 1 or 2?
I am a noob here so forgive me if my questions are stupid.

No

Sent from my brain tumor causing device using Tapatalk.
Please give THANKS and REP+1 if someone helped you

 

[telis93]

Is the install position of the demon changed in Corona? Ithink it was in the bottom with the trinity mobo.