DemoN Or Nand-X Question?

[sabert00th]

Hey everyone.
Wanted to ask a quick question.

What would you prefer for a xbox360 slim console('Motherboard is trinity').

demoN.
Or
Coolrunner.

What are some advantages?
and could you explain which is better and useful for RGH?

Thanks in advance :biggrin:

 

[Martin C]

I would recommend speaking to someone who modifies consoles in detail so you understand what the DemoN is and how it works, as your question doesn't make any sense (hence no answer). Either that or you need to do a lot more reading.

 

[sabert00th]

I would recommend speaking to someone who modifies consoles in detail so you understand what the DemoN is and how it works, as your question doesn't make any sense (hence no answer). Either that or you need to do a lot more reading.

Basically what im trying to get across is what are the difference between the two?
I know how everything works and some details about both products.
but out of everything ,do I still need the nand-x if i purchase the DemoN?

 

[mat1110]

A deamon is a dual NAND so you can run 2 different dashes. You will need a coolrunner and deamon if you went deamon route. But if you went just coolrunner you will need that and the NAND x

 

[sabert00th]

A deamon is a dual NAND so you can run 2 different dashes. You will need a coolrunner and deamon if you went deamon route. But if you went just coolrunner you will need that and the NAND x

Thanks for the info.
so basically i dont really need the nand-x if i just wanted to dual boot?
i can still read and write the nand without the nand-x?

 

[Ticallion]

I know how everything works and some details about both products.

Clearly you don't.

DemoN reads/writes the nand direct, so no you won't need a nand-x, but you really need to educate yourself more before buying anything.

 

[WNYConsoles]

The DemoN has R/W capabilities however if you don't know this than it is quite obvious that you didn't read any of the information on the forums or hell even the DemoN product specs as it clearly says R/W capabilities.

If your not willing to read and you try the install yourself you are going to fail, there is no question about that.

 

[sabert00th]

Clearly I do.
Im asking so I can get full detail about everything before I go out and buy something ("My god i thought this was a help forum???")

Anyway thanks mat1110 for the info.

 

[mat1110]

It's ok. I do have to say the guys are correct though I spent 6 months reading and reading all the great guides the guys put on here and learnt everything.

Good luck with it as most people still go ahead with it. My recommendation would be send it to one of the pros on here

 

[WNYConsoles]

This is a help/support forum and everyday and all day we have people come on here expecting hand holding and spoon feeding. When you come here asking questions that are right in front of you what do you expect from us? It is a clear sign of expecting spoon fed information.

Like I said all your questions are right on the DemoN's Product Spec's that ALL resellers post. To spoon feed you some more I even marked in bold and red font.

Key Features of the of the Xecuter DemoN

• True NextGen Dual NAND Device
• Rock Solid Stability & Design
• Both Phat & Slim Versions
• Phat Small Block (SB 16MB) & Phat Big Block (BB 256MB / 512MB) Versions Available
• Easy QuickSolder Solution (All Phats & Slim Trinity)
• Wires Only Solder Pads Option (All versions including Corona)
• Easy Switch Between Stock Onboard NAND and Custom NAND
• External Module for USB / Switching / LED's
• Sync Button NAND Switch Option
• Turbo NAND R/W Mode (16MB Dump Less Than 28 Seconds)
• 100% Parallel Programming (No slow SPI or PIC style Read/Write)
• Built-In USB NAND Read/Write Hardware (NAND-X / Other SPI Hardware Not Required)
• Intelligent Bad Block Re-Mapping
• Onboard MicroUSB for OffLine Testing / Programming
• Xecuter CoolRunner Programming
• Xecuter CoolRunner Enable / Disable Feature
• Includes DemoN to CoolRunner Adapter and FFC Shielded Cable
• Dedicated DemoN ToolBox Software
• Many Low level Commands & Functions For Developers
• Dedicated DLL For 3rd Party Developers To Fully Interface With Demon
• Developer Features Such As Remote Power Included Out-of-the-box
• Serial UART TX/RX Access
• Rock Solid SMC Reset Functions
• 16 Available I/O's - Huge Add-On Possibilities !
• Many Add-ons & Extra Features In Development
• Supports Phat JTAG Installs (Inc All Xecuter QSB JTAG Kits)
• No Lifting of CE Pin on Both Phat & Slim
• No Trace Cuts on Both Phat & Slim
• Custom Software & Drivers
• Fully Upgradeable Firmware
• Proven Xecuter Build Quality & Warranty
• Designed & Tested By Several Major Names In The Xbox Homebrew Scene

 

[sabert00th]

thanks mat1110 and WNYConsoles for the info.
thats all I wanted to know before I bought the product myself.

 

[WNYConsoles]

I would highly advise you have someone else do this for you.

 

[sabert00th]

I would highly advise you have someone else do this for you.

Iv already done this myself on a phat console, I was just confused on the deamon and the nand-x.


im doing this on a trinity now , so thought i would ask.

 

[Martin C]

("My god i thought this was a help forum???")

A help forum with rules:

#4 READ & SEARCH FIRST
The forum is an extensive archive of questions and answers. We also have a very detailed guides & tutorials section that answer pretty much every question you could possible have. We find it very rude when members post questions that have been answered a hundred times before. It shows that they have not searched for the answer and are either lazy and want to be spoon fed, or that they have complete disregard for the very rules that you are reading right now.

If you can't find the answer then that's fine, simply state that you have already looked when making your post. We are here to help people, not only to give advice but to educate them on helping themselves.



---------- Post added at 15:35 ---------- Previous post was at 15:34 ----------

Iv already done this myself on a phat console, I was just confused on the deamon and the nand-x.


im doing this on a trinity now , so thought i would ask.

If you've already done this on a phat console, there is no difference between the two. You should know this.

 

[sabert00th]

A help forum with rules:

#4 READ & SEARCH FIRST
The forum is an extensive archive of questions and answers. We also have a very detailed guides & tutorials section that answer pretty much every question you could possible have. We find it very rude when members post questions that have been answered a hundred times before. It shows that they have not searched for the answer and are either lazy and want to be spoon fed, or that they have complete disregard for the very rules that you are reading right now.

If you can't find the answer then that's fine, simply state that you have already looked when making your post. We are here to help people, not only to give advice but to educate them on helping themselves.



---------- Post added at 15:35 ---------- Previous post was at 15:34 ----------



If you've already done this on a phat console, there is no difference between the two. You should know this.

I understand the rules and all.
and being lazy and spoon fed is out of the question.
since obtaining a new slim, I would like to know every little detail about everything.
everything iv searched didn't really answer anything I had intended.
so figured id ask.

thanks

 

[Martin C]

Since you've not exactly stated which guides you've read (and didn't understand), there's not a lot we can do about that.

If you find information is missing or unclear, let us know and we'll try to clarify or include it.

 

[sabert00th]

Since you've not exactly stated which guides you've read (and didn't understand), there's not a lot we can do about that.

If you find information is missing or unclear, let us know and we'll try to clarify or include it.

Thanks ill keep it in mind next time I see a post that i dont cleary understand.

many thanks guys:biggrin: