DemoN Phat Problem

[SimbAA]

Hi,
I have a TX DemoN et i want to test it.I connected it to PC with a micro USB Cable (Switched to PC Mode),and tried to install DemoN Toolbox(ran as administrator),but it shows this error :
Unable to execute file in the temporary directory.Setup aborted
Error 5 : access denied.
I also installed drivers by downloading it and installing it while the demon is connected to the PC.
Thanks for helping.

 

[gavin_darkglide]

Use J-Runner.

 

[SimbAA]

Is there a tutorial ? Because the DemoN icon on J-Runner don't appear.

 

[CptKlink]

are you running windows vista or 7 or 8? Cuz either of thoes 3 you need to disable drive signature enforcement. To do that push F8 during boot up and pick that option out of a list that will pop up.

 

[SimbAA]

Im running on 7.I try and i tell you if its ok. Thanks

 

[SimbAA]

Yea it works ^^ But there is no information about the DemoN in the console.And Where can i find .bin files for programming test ? Do i need to update my DemoN ?

 

[CptKlink]

All DemoNs need updateing if brand new heres a link for the latest DemoN Firmware. http://www.mediafire.com/download/612rm1u32ao8z1q/demon_firmware_1.04.bin

 

[SimbAA]

Ok thanks you ! But how i do the reading test ? I need a file but i dont know what file...

 

[Krafter]

Ok thanks you ! But how i do the reading test ? I need a file but i dont know what file...

Just perform a read it. It will create a blank bin file in which you can write back. Just be sure not to get that file mixed up with the real one that you will read from your console because it will be 100% useless.

 

[SimbAA]

Thanks you guys

 

[nath247]

Once you can read from it, try writing your stock NAND to it and boot from it to test everything is working, soldering ok etc.