Demon. retail nand different LDV's?

[brendanj9554]

hey guys, i have just finished installing cr revc and demon. i have put glitched image on demon nand, and all is fine, quick boots etc. boot when i try to boot retail nand i get nothing. i have noticed that there are 2 different ldv loaded. 8 and 9 ??? could it be as simple as that? change the 8 to a 9?

have attached image of jrunner.

http://i990.photobucket.com/albums/af24/bigbren2008_2010/jrunner-1.png

thanks guys

 

[BL4K3Y]

Boot to XeLL and combine the number of Fs on fuse-set lines 7 and 8 - this is your console's current highest LDV.

Ensure it matches what J-Runner tells you and if it doesn't, build a new retail image with an LDV increment of 1 (the current highest value you see in J-Runner).

 

[brendanj9554]

cheers BL4K3Y, i have checked all pionts with my meter and etc and everything checks out, not quite up to par with the software side of things yet. hopefully thats the solution

i got 9 F's on fuseset 07. so i would need to build a retail image with LDV 10 or have i got it wrong?

 

[brendanj9554]

hmmmm, odd.

i have just been playing around with the console. got the retail nand to boot no problem when i set the coolrunner to prg.

i programmed the coolrunner out of the console with my nandx.

do i need to reflash coolrunner with demon while retail nand is selected prehaps?

 

[BL4K3Y]

If XeLL says your LDV is 9, then your retail image is fine.

If you have a DemoN installed, leave the CR set to NOR and program an EN timing file to it using the DemoN (remember to solder the CR_EN wire in place too).

 

[brendanj9554]

thanks again, been using the search button. it is indeed an untapped and under used resource lol. just came across the timing file.

http://team-xecuter.com/forums/showthread.php?t=88173

thanks bud

 

[BL4K3Y]

Use J-Runner to program your CoolRunner - read the included PDF for more details .