Demon-Trinity problem

[tonywhite]

Hi, everybody! Small problem. Original Nand it is written down in x360, glitch image in the Demon. The original works, at start glitch image DBG doesn't blink, but from the fan are audible glitch. In record attempt in the Demon original Nand, that at all doesn't start, doesn't start and glitch image.

All points are checked. Without the Demon glitch image works and DBG blink normal.

What to check and on what to pay attention? Thanks

Log:

J-Runner v0.2 Beta (287) Started

current dashlaunch 3.06 does not work with 16203
Checking Files
Finished Checking Files
Initializing updflash.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
DEMON
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:32 min:sec

Programming Coolrunner
C:\Users\tonywhite\Desktop\J-Runner v02 Beta (280) Core Pack\common\xsvf\trinity_en.xsvf
sending xsvf to demon...
Done
Current: DemoN
Switching to XBOX
Success
Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
XBOX360
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:32 min:sec

Programming Coolrunner
C:\Users\tonywhite\Desktop\J-Runner v02 Beta (280) Core Pack\common\xsvf\RGH2_C_en.xsvf
sending xsvf to demon...
Done

 

[razblade77]

did you use a fiber glass pen to clean the contacts on the demon as the soldering on pwr and gnd look cold. and try swiching to rgh1 on j-runner and flashing the trinty_en on the coolrunner instead of the RGH2_C_en.

 

[tonywhite]

Many thanks! The second day I sit over it...

swiching to rgh1 on j-runner and flashing the trinty_en on the collrunner instead of the RGH2_C_en - It helped!

 

[Utmad]

It should do as that is the proper file for the trinity